Simfer B4EM04070 Руководство по эксплуатации онлайн [31/71] 726292

Rack Positions

It is important to place the wire grill into

the oven properly. Do not allow wire rack to

touch rear wall of the oven. Rack positions

are shown in the next gure. You may place

a deep tray or a standard tray in the lower

and upper wire racks.

Installing and removing wire racks

To remove wire racks, press the clips shown with arrows in the gure,

rst remove the lower, and than the upper side from installation location.

To install wire racks; reverse the procedure for removing wire rack.

Replacing Oven Lamp

WARNING: To avoid electric shock, ensure that the appliance circuit is

open before changing the lamp. (having circuit open means power is off)

First disconnect the power of appliance and ensure that appliance is cold.

Remove the glass protection by turning as indicated in the gure on the

left side. If you have difculty in turning, then using plastic gloves will

help you in turning.

Then remove the lamp by turning, install the new lamp with same

specications.

Reinstall glass protection, plug the power cable of appliance into electrical

socket and complete replacement. Now you can use your oven.

Type G9 Lamp Assembly: Type E14 Lamp Assembly:

Rack 4

Rack 3

Rack 2

Rack 1

220-240 V, AC

15-25 W

Figure 13

220-240 V, AC

15 W

Figure 14