Simfer B6ES69001 Инструкция по эксплуатации онлайн [2/19] 726351

INSTALLATION OF YOUR OVEN

Electrical Connection and Security

1. THIS APPLIANCE MUST BE EARTHED

2. Your oven is adjusted in compliance with 230 V AC, 50 Hz (for SA will be 220-240V, 50-60 Hz), electrical

supply, and requires a 16 Amp (for England 13 Amp) fuse. If the mains are different from this specified value,

contact an electrician or your authorized service.

3. Isolation switches for the oven must be accessible to the end user with the oven in place.

4. Should you need to replace the 16 Amp plug top (for England 13 Amp), please ensure you rewire the plug as

follows;

Brown wire to the Live terminal

Blue wire to the Neutral terminal

Yellow & Green wire to Earth

5. Electrical connection of the oven should only be made by using sockets with Earth system installed (for England

B.S. Approved sockets with Earth system), and in compliance with Regulations. If there is no proper socket with

Earth in place, immediately contact a qualified electrician. The Manufacturer will not be responsible for damage

or injuries that can arise because of inappropriate supply outlets with no earth system.

6. If your electric supply cable becomes damaged, it should be replaced by an authorized service engineer or

qualified electrician.

7. The electrical supply cable should not touch the hot parts of the appliance.

8. The oven should be installed into an oven housing that provides good higher ventilation.

9. This oven must be correctly installed and secured in place, in accordance with manufacturer’s instructions and

by a qualified person.

10. Never work on the oven while it is switched on. Maintenance and service must be carried out after the power

supply has been disconnected.

60 CM

Figure 1