Philips HD8917 Saeco Incanto [31/80] What to do if the descaling procedure is interrupted

11 Wait until the machine stops dispensing water. The descaling procedure

is finished when the tick appears on the display.

12 Press the OK button to exit the descaling cycle. The machine starts

heating up and performs the automatic rinsing cycle.

13 Remove and empty the container.

14 Perform the 'Weekly cleaning of the milk carafe' procedure to clean the

milk carafe after descaling.

15 Clean the brew group by performing the 'Weekly brew group cleaning'

cycle.

16 Install a new AquaClean filter in the water tank.

Tip: Using the AquaClean filter reduces the need for descaling!

What to do if the descaling procedure is interrupted

Once the descaling procedure has started, you must complete it till the very

end without switching off the machine. If the machine gets stuck during the

cycle, you can exit the descaling procedure by pressing the standby button.

If this occurs, or in case of a power failure or accidental disconnection of the

cord, do the following:

1 Empty and rinse the water tank thoroughly.

2 Fill the water tank up to the CALC CLEAN level indication and switch the

machine back on. The machine will heat up and perform an automatic

rinsing cycle.

3 Before brewing any beverages, perform a manual rinsing cycle, see

section 'Manual rinsing cycle'.

Note: If the descaling procedure was not completed, the machine will

require another descaling procedure as soon as possible.

Warning icons and error codes

Warning signals are displayed in red. Below you find a list of the

warnings that may appear on the display and their meaning.

Fill the water tank with fresh water to the MAX level indication.

The bean hopper is empty. Put new coffee beans in the bean hopper.

English