Vitek VT-1699 SR [9/110] English

9

4. Press the “Start/+30 sec/Confirm” button (15) to start defrost products by weight.

5. Remaining defrost time, that is set automatically depending on the selected weight, will appear on

the display (10), after the defrost process is over the oven will be switched off, and you will hear

5 sound signals.

Products defrosting by time

1. Open the door, put the products into the cavity and close the door.

over the unit will be switched off, and you will hear 5 sound signals.

Multi-stage cooking

This microwave oven allows cooking of products in two stages. After finish of the first stage you will

hear a sound signal and then the second stage will start.

Note: defrost mode can be set only in the first cooking stage. Auto cooking modes cannot be set as

one of the cooking stages.

Example: You need to defrost products for 5 minutes and then cook them in the microwave mode at

power 80% for 7 minutes.

1. Open the door, put the products into the cavity and close the door.

2. Press the “Defrost by weight/time” button (12) twice, “dЕF-2” will appear on the display –

7. Set cooking time 7 minutes rotating the knob (16). “07:00” will appear on the display.

8. Press the “Start/+30 sec/Confirm” button (15) to start cooking, countdown of the remaining

time will start on the display (10). After the first cooking stage is over (“dЕF-2” - quick defrost by

time), you will hear one sound signal. After the cooking process is over, the unit will be switched

off, and you will hear 5 sound signals.

Setting start cooking time

1. Open the door, put the products into the cavity and close the door.

2. Check whether the time is set properly, and then select the cooking program as you wish.

Note: you can set maximum two cooking stages.

If you lay over cooking time, defrost mode can be set as a cooking program.

6. Press the “Clock/Presets” button (13), on the display (10) flashing “:00” will appear.

7. Set “hours” rotating the knob (16).

8. Press the “Clock/Presets” button (13), on the display (10) flashing “:00” will appear.

VT-1699 belorus.indd 9 13.09.2012 11:51:52