Hotpoint-Ariston C 3 VM5 R_HA [3/36] Ariston

Hotpoint-Ariston C 3 VM5 R_HA [3/36] Ariston
GB
3
5. Fix the power supply cable in place by fastening
the cable clamp screw.
6. Close the terminal board cover by tightening the
screws V.
Connecting the supply cable to the mains
Install a standardised plug corresponding to the
load indicated on the data plate located on the
appliance.
The appliance must be directly connected to the
mains using an omnipolar circuit-breaker with a
minimum contact opening of 3 mm installed between
the appliance and the mains. The circuit-breaker
must be suitable for the charge indicated and must
comply with current electrical regulations (the
earthing wire must not be interrupted by the circuit-
breaker). The supply cable must be positioned so
that it does not come into contact with temperatures
higher than 50°C at any point.
Before connecting the appliance to the power
supply, make sure that:
The appliance is earthed and the plug is compliant
with the law.
The socket can withstand the maximum power of
the appliance, which is indicated by the data
plate.
The voltage is in the range between the values
indicated on the data plate.
The socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it.
Do not use extension cords or multiple sockets.
Once the appliance has been installed, the power
supply cable and the electrical socket must be
easily accessible.
The cable must not be bent or compressed.
 The cable must be checked regularly and replaced
by authorised technicians only.
The manufacturer declines any liability should
these safety measures not be observed.
*
Only available in certain models.
TECHNICAL DATA
Oven dimensions
(HxWxD)
34x38x41 cm
Volume
53 l
Useful
measurements
relating to the oven
compartment
width 42 cm
depth 44 cm
height 17 cm
Power supply
voltage and
frequency
see data plate
Ceramic hob
Front Left
Back Left
Back Right
Front Right
Max. ceramic hob
consumption
1200 W
1800 W
1200 W
1800 W
6000 W
ENERGY LABEL
Directive 2002/40/EC on the label of
electric ovens. Standard EN 50304
Energy consumption for Natural
convection heating mode:
=
Static;
Declared energy consumption for
Forced convection Class heating
mode:
>
Fan-assisted.
EC Directives: 73/23/EEC dated
19/02/73 (Low Voltage) and subsequent
amendments
89/336/EEC dated 03/05/89
(Electromagnetic Compatibility) and
subsequent amendments
93/68/EEC dated 22/07/93 and
subsequent amendments
2002/96/EC.

Содержание

Похожие устройства

H Hotpoint ARISTON 5 Fix the power supply cable in place by fastening the cable clamp screw 6 Close the terminal board cover by tightening the screws V Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate located on the appliance The appliance must be directly connected to the mains using an omnipolar circuit breaker with a minimum contact opening of 3 mm installed between the appliance and the mains The circuit breaker must be suitable for the charge indicated and must comply with current electrical regulations the earthing wire must not be interrupted by the circuit breaker The supply cable must be positioned so that it does not come into contact with temperatures higher than 50 C at any point Before connecting the appliance to the power supply make sure that The appliance is earthed and the plug is compliant with the law The socket can withstand the maximum power of the appliance which is indicated by the data plate The voltage is in the range between the values indicated on the data plate The socket is compatible with the plug of the appliance If the socket is incompatible with the plug ask an authorised technician to replace it Do not use extension cords or multiple sockets TECHNICAL DATA GB Oven dimensions HxWxD Volume Useful measurements relating to the oven compartment Power supply voltage and frequency Ceramic hob Front Left Back Left Back Right Front Right Max ceramic hob consumption 34x38x41 cm 53 I width 42 cm depth 44 cm height 17 cm see data plate 1200W 1800W 1200W 1800W 6000 W Directive 2002 40 EC on the label of electric ovens Standard EN 50304 Energy consumption for Natural ENERGY LABEL convection heating mode Q Static Declared energy consumption for Forced convection Class heating mode S Fan assisted C EC Directives 73 23 EEC dated 19 02 73 Low Voltage and subsequent amendments 89 336 EEC dated 03 05 89 Electromagnetic Compatibility and subsequent amendments 93 68 EEC dated 22 07 93 and subsequent amendments 2002 96 EC Once the appliance has been installed the power supply cable and the electrical socket must be easily accessible The cable must not be bent or compressed The cable must be checked regularly and replaced by authorised technicians only The manufacturer declines any liability should these safety measures not be observed Only available in certain models 3

Скачать