Kenwood NX-340 [10/52] Preparation

PREPARATION

INSTALLING THE CHANNEL STOPPER

You can set the channel stopper position for channels 2, 4,

6, 8, 10, 12, and 14. Inserting the Channel stopper prevents

unnecessarily selecting channels which do not exist.

• Selecting a channel which does not exist causes a continuous error

tone to sound.

1 Set the Channel selector to channel 1, then pull the

Channel selector knob off the transceiver.

• If the Channel selector is not positioned at channel 1, the knob may

not install correctly and the channel may be unable to change.

2 Insert the channel stopper.

3 Set the arrow of the Channel stopper to the highest channel

number for the transceiver.

4 Reinsert the Channel selector knob.

Screw the antenna into the connector on the

top of the transceiver by holding the antenna at

its base and turning it clockwise until secure.

Note: The antenna is neither a handle, a

key ring retainer, nor a speaker/ microphone

attachment point. Using the antenna in these

ways may damage the antenna and degrade your

transceiver’s performance.

INSTALLING THE ANTENNA

Channel stopper

Arrow

Antenna