Elenberg CLPD-6010 [22/28] Handset locator paging function

3. If the location selected already has a number stored and you want to

replace it, long press the © key will clear the stored number. Other-

wise press “M” key repeatedly to select an empty location.

4. Enter the desired telephone number. In case a wrong digit is entered,

press the© key to delete the digit for correction. If you wish to add a

pause, press key at the desired location

5. Press the “P” key to store the new number into the memory.

To dial a number from memory

1. Make sure the phone is OFF (not in TALK mode).

2. Press “M” repeatedly to scroll to the number you want to dial.

2. Press “M” key then press numeric key (0-9) to select the desired num-

ber.

3. Press the key

Remark: If the phone number contains more than 10 digits, press the

key will toggle the display to display the “remaining” digits.

To delete memory contents

1. Press “P” then “M” to enter the memory editing mode.

2. Press “M” key repeatedly until the number you wish to delete is dis-

played.

3. Long press © key to clear the stored number.

4. Press “P” key to conﬁrm, and conﬁrmation tone can be heard.

Recall

Recall is used to access special telephone service. Contact your local

telephone company for details. If your unit is connected to a PBX, press

the /R key allows you to access some features of your PBX such as

transferring an extension call.

Handset Locator (Paging Function)

This feature helps to locate a misplaced handset.

Press [ Page ] button on the base, the handset will

beep continuously for 60 seconds or until you do

one of the following:

1. Press key on the handset.

2. Press [ Page ] key again.

Low battery warning

There are three short beeps to alarm that the battery is empty and the

battery is needed to recharge. After the beeps, the battery icon will in-

dicate the battery is empty as showing “ ”.