Centek CT-1149 Инструкция по эксплуатации онлайн [11/16] 744227

Centek CT-1149 Инструкция по эксплуатации онлайн [11/16] 744227
11
-
Open the lid of the water tank (1) and fill it up to the required level with cold
water.
- Close the tank cover (1).
- Install the glass (4) on the platform.
- Plug the power cord into a power outlet.
-
Turn on the coffee maker by moving the switch (6) to the “I” position, the indicator
light will light up and the coffee maker will start working.
-
When all the water has passed through the filter, turn off the coffee maker by
setting the switch (6) to the «0» position.
-
To keep the coffee hot, keep the glass (4) on the platform without turning off
the coffee maker.
ATTENTION!
-
When there is no need to heat the glass (4), turn off the coffee maker by turning
the switch (6) to the «0» position.
- During the preparation of coffee, water under steam pressure passes through
the ground coffee, so do not open the filter holder (2) and remove the filter.
5. CARE OF THE APPLIANCE
- Unplug the appliance from the mains before cleaning.
-
Make sure the coffee maker is completely cool, then wipe the outside of the
appliance with a soft, dry cloth.
-
Use mild detergents to remove dirt, do not use metal brushes or abrasive
detergents.
- Wash all removable parts with warm water and neutral detergent, rinse, wipe
dry and reinstall.
- Do not immerse the coffee maker in water or other liquids.
- Do not put the coffee maker in the dishwasher.
DESCALING
- Descale the coffee maker regularly.
-
To remove scale, fill the water tank with a solution of citric acid (25-30 g of citric
acid is needed per 1 liter of water), or use a special descaling agent (according
to the manufacturer’s instructions on the packaging).
-
Switch on the appliance and carry out the brewing cycle without adding coffee.
-
When the water tank runs out of solution, rinse the coffee maker thoroughly.
To do this, fill the tank with clean water and, without adding coffee, turn on the
device. Repeat the cycle several times.
- Descaling must be done after every 300 uses.
6. TECHNICAL SPECIFICATIONS
- Rated voltage: 220-240 V ~50/60 Hz
- Power: 820-980 W
- Volume: 1200 ml
BE CAREFUL! Accessible surfaces of the appliance
can reach high temperature during operation.
7. DISPOSAL
Upon expiry of its service life the appliance can be disposed of separately from ordinary
domestic waste. You can turn it over to a specialized electric and electronic appliance
disposal and recycling centre.
8. CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years since the date of sale to the end user, provided
the item will be used in strict accordance with the present manual and the applicable
technical standards. Upon expiry of the service life please contact the nearest
authorized service centre for suggestions as to further operation of the appliance.
The manufacturing date of the appliance is integrated into the serial number (digits
2 and 3 - year, digits 4 and 5 - month of manufacture). If any questions related to
appliance maintenance should arise, or if the appliance has malfunctions, apply to
the CENTEK TM Authorized Service Center. The address of the service center can be
found on the website https://centek.ru/servis. Service support contacts: Phone: +7
(988) 24-00-178, VK: vk.com/centek_krd. General Service Center: OOO «Larina-Servis»,
Krasnodar, Phone: +7 (861) 991-05-42.
The product has the Certificate of Conf ormity:
№ ЕАЭС RU С
-
CN.АД87.В.00386/22 of 24.11.2022.
9. MANUFACTURER AND IMPORTER INFORMATION
I mported to
EAEU by: Individualniy Predprinimatel Asrumyan Karo Shurikovich.
Address: Russia,
350912 Krasnodar, ul. Atamana Lysenko, 23, pgt. Pashkovskiy. Phone:
+7 (861) 2-600-900.
DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the date of
sale
to the end consumer. With this Warranty Card the Manufacturer confirms the
proper
condition of the appliance and undertakes to repair, free of charge, all
defects caused
by the Manufacturer’s default.
GUARANTEE MAINTENANCE TERMS
1.
The guarantee shall be valid if the following documentation conditions are observed:
-The original Warranty Card shall be filled out correctly and clearly, indicating the
of appliance model, serial number and sale date, the stamp of the seller company
and signature of its representative shall be available, as well as the stamps on
each coupon and the buyer’s signature in the Warranty Card.
The Manufacturer reserves the right to reject guarantee maintenance if the buyer
fails to provide the abovementioned documents or if the information contained therein
is incomplete, illegible or ambiguous.
2. The guarantee shall be valid if the following operation conditions are observed:
-the appliance is used in strict accordance with the present manual;
-the safety rules and requirements are observed.
3.
The guarantee does not apply to regular maintenance, cleaning, installation and
setup of the appliance at the owner’s location.

Содержание

Скачать