Aten VM7514 Краткое руководство по установке онлайн

VM7514/VM8514

4-Port HDBaseT Input/Output Board Quick Start Guide

Hardware Review

VM7514 Front View

1. HDBaseT Input Ports

2. IR Ports

3. RS-232 Ports

4. Status LED

5. HDBaseT Port LED

VM8514 Front View

1. HDBaseT Output Ports

2. IR Ports

3. RS-232 Ports

4. Status LED

5. HDBaseT Port LED

Hardware Setup

I/O Board Installation

1. (Optional) Power off the Modular Matrix switch.

Note: The VM1600 I/O boards are hot swappable.

2. 2. On the rear of the VM1600 unscrew the two Phillips head screws

and remove the back panel cover.

Note: The four upper slots are for input boards; the four lower slots

are for output boards.

3. Slide the I/O board into the open slot on the VM1600 until it secures

in place.

4. Tighten the two screws on the I/O board to fasten it to the Modular

Matrix switch, until it’s secured to the unit.

5. Repeat the steps if you are installing additional I/O boards.

6. (Optional) Power on the Modular Matrix switch.

VM7514 Front View VM8514 Front View

1 3

2 4

1 32 4

Note: The HDBaseT Port LED lights orange to indicate there is no connection and lights green to indicate the

system is receiving power.

Package Contents

1 VM7514 4-Port HDBaseT Input Board, or

1 VM8514 4-Port HDBaseT Output Board

4 Terminal Block Connectors

1 IR Transmitter

1 IR Receiver

1 User Instructions