Aten VS381B [19/27] Vs381b installation

Aten VS381B [19/27] Vs381b installation
9
Chapter 2
Hardware Setup
Installation
Installation of the VS381B is simply a matter of plugging in the appropriate
cables.
VS381B Installation
To install the switch, refer to the installation diagram below as you perform the
following steps:
1. Use HDMI cables to connect HDMI source devices to the HDMI input
ports on the VS381B. Optionally secure the cables with cable lock screw
for ATEN LockPro
TM
.
2. Use an HDMI cable to connect an HDMI-enabled display to the HDMI
output port on the VS381B. Optionally secure the cables with cable lock
screw for ATEN LockPro
TM
.
3. (Optional) To control the VS381B using an IR remote control, connect the
IR receiver to the IR receiver port.
4. Supply power to the VS381B using the USB to DC power cord.
5. Power on the display and source devices.
1. Important safety information regarding the placement of this
device is provided on page 13. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off.
3. Make sure that all devices you will be installing are properly
grounded.

Содержание

Скачать