SNR S2989G-8TX — руководство по настройке IPv6 и устранению неполадок SAVI [553/553]

Превью страниц Страница 553 / 553

S2989G-24TX Operation Manual

Chapter 11 IPv6 Configuration

11-43

Switch1(config-if-ethernet1/0/1)#exit

Switch1(config)#interface ethernet1/0/12-20

Switch1(config-if-port-range)#savi ipv6 check source ip-address mac-address

Switch1(config-if-port-range)#savi ipv6 binding num 4

Switch1(config-if-port-range)#exit

Switch1(config)#exit

Switch1#write

11.7.4

SAVI Troubleshooting

After ensure no problem about SAVI client hardware and cable, please check the

status which may exist and the propositional solutions in the following:

 If IPv6 packets are filtered incorrectly after enable SAVI function, please ensure the

global SAVI function enabled. After that, enable the global function of the

corresponding SAVI scene according to the actual application scene and enable the

port authentication function.

 If client can not correctly obtain IPv6 address assigned by DHCPv6 server after

enable SAVI function, please ensure DHCP port trust is configured by uplink port with

DHCPv6 server.

 If node binding can not be set for the new user after enable SAVI function, please

check whether the direct-link port configures the max binding number, and whether

the binding number reaches to the max number. If the binding number exceeds the

max binding limit, it is recommended to configure the bigger binding limit.

 If node binding can not be set for new user after configure the bigger binding limit,

please check whether the direct-link port configures the corresponding binding

number, and whether the corresponding binding number reaches to the max number

in the same MAC address. If the binding number exceeds the max binding limit, it is

recommended to configure the bigger binding limit.