Hitachi RAS-30EH2 / RAC-30EH2 [19/51] Attaching the air purifying filters

– 19 –

ENGLISH

ATTACHING THE AIR PURIFYING FILTERS

Open the front panel.

● Pull up the front panel by holding it at both sides with

both hands.

Remove the pre-ﬁ lter.

● Push upward to release the claws and pull out the

pre-ﬁ lter.

Attaching the air purifying ﬁ lters to the ﬁ lter frame.

● Attach the air purifying ﬁ lters to the frame by gently

compress its both sides and release after insertion into

ﬁ lter frame.

Attach the pre-ﬁ lters.

● Attach the pre-ﬁ lters by ensuring that the surface written

“FRONT” is facing front.

● After attaching the pre-ﬁ lters, push the front panel at

three arrow portion as shown in ﬁ gure and close it.

Cleaning and maintenance must be carried out only by qualiﬁ ed service personal. Before cleaning,

stop operation and switch off the power supply.

CAUTION

Do not bend the air purifying

ﬁ lter as it may cause damage to

the structure.

NOTE

● In case of removing the air purifying ﬁ lters, please follow the above procedures.

● The cooling capacity is slightly weakened and the cooling speed becomes slower when the air purifying

ﬁ lters are used. So, set the fan speed to "HIGH" when using it in this condition.

● Do not operate the air conditioner without ﬁ lter. Dust may enter the air conditioner and fault may

occur.

Claws

(4 places)