MODECOM MC-C1W [4/24] Www modecom eu

www.modecom.eu

laser mouse

Steps of removing the receiver and installing the

batteries

1. Prepare a new AAA alkaline battery.

2. Press the button at the back of the mouse, and then remove the cover.

3. Please identify the right side of the battery’s polarity and insert the

battery.

4. Put back the top cover. You will hear snap sound once the cover is

properly installed.

Install the receiver and establish data connection

1. Remove the receiver from the bottom of the mouse, and plug it into

available USB port of your computer.

2. System will detect and install new hardware automatically.

3. Once the installation is ready system shall show message that the de-

vice is ready to be used.

DPI Switch buttons

By default DPI value is 1600 DPI. You can switch the DPI mode by press-

ing the DPI switch on the bottom of the mouse

Use on different surfaces

MC-C1W should be able to work correctly on most surfaces, except the

transparent glass.

Low voltage indicator

At the top of the mouse there is low-voltage LED which is lit if the battery

voltage is lower than ~1.1V voltage. This is to inform you that battery

replacement might be needed soon.