Lincoln MKT (2013) QRG [6/8] Comfort
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Lincoln MKT (2013) QRG [6/8] Comfort

Lincoln MKT (2013) QRG [6/8] Comfort
1110
CONVENIENCE
* if equipped
CONSOLE REFRIGERATOR/
FREEZER*: Before using,
flip the console lid forward
and then remove the cover
(make sure to reinstall the
cover to help maintain
the temperature). For the
refrigerator, press the
COOL control. In this mode,
the system will cool to
approximately 41°F (5°C).
For the Freezer, press the
FREEZE control. The system
will cool to approximately
23°F (-5°C). Press the
selected control again to
turn the system o.
Note: Your ignition must be
on for this system to operate.
MEMORY FUNCTION: Allows
one touch recall of memory
positions for the driver seat,
power mirrors, steering
column and power adjustable
foot pedals. Use the memory
controls located on the
driver’s door to program and
then recall memory positions.
POWERFOLD
®
THIRD-ROW
SEAT*: The third-row seat
features a one-touch power
operation that allows you
to adjust the seats with
the touch of a button. The
buttons are located behind
the third-row seats on the
left-hand quarter trim panel.
To use, press the RH/BOTH/
LH button to select the right
seat, the left seat or both
seats you want to move.
Then select the desired
seat position:
Press the STOW button
to stow the seat into the
tub floor.
Press the FOLD button
(the top portion of the
HEATED AND COOLED
FRONT SEATS: To access,
press the Climate corner
on the touch screen. For
heated front seats, press
repeatedly to cycle through
the various heat modes and
o. For cooled front seats,
press repeatedly to cycle
through the various cooling
modes and o.
SECOND-ROW HEATED
AND COOLED SEATS*:
These controls are
located on the rear of
the floor console. Press
continuously to cycle
through the various heat
modes and o. Press
repeatedly to cycle through
the various cooling modes
and o.
COMFORT
To Program position 1, press
and hold the 1 button until
you hear a chime. Use this
same procedure to set
positions 2 and 3 using
the respective buttons.
You can now use these
controls to recall the set
memory positions.
INTELLIGENT ACCESS (IA)
REMOTE ENTRY ICONS:
Press once to lock all
doors. Press again within
three seconds to confirm all
doors are locked.
Press once to unlock the
driver’s door. Press again
within three seconds to
unlock all doors.
Press to activate the
panic alarm. Press again
or turn on the ignition
to deactivate.
Press twice within
three seconds to open
the liftgate.
Car finder: Press
twice
within three seconds to
locate your vehicle. The
horn will chirp and the
lamps will flash.
INTELLIGENT ACCESS
(IA) KEY:
Note: Your intelligent
access key must be within
three feet of the vehicle
for intelligent access to
function properly.
To unlock and open the
driver’s door, pull the
front exterior door handle.
To lock the doors, touch
the sensor button on the
door handle. To unlock
and open the liftgate,
press the exterior liftgate
release button above the
license plate.
The intelligent access key
also contains a mechanical
key blade, which can be
used to unlock the driver
door if necessary.
REMOTE START: Remote
start allows you to start
the engine from outside
your vehicle using your
transmitter. To start, press
and then press twice
within three seconds. Once
inside, apply the brake
while pressing the ENGINE
START/STOP button. Shift
into D (Drive) and go. If you
have an integrated keyhead
transmitter, simply insert
the key into the ignition
and turn the ignition on as
you normally would before
driving. To turn the engine
o from outside the vehicle
after using your remote
start, press once.
button) to fold the seat
back down.
Press the NORMAL
button to return the
seat to the normal
seating position.
Note: The power folding
seats work only when the
vehicle is in P (Park) and
the liftgate is open.
HEATED STEERING
WHEEL*: Your vehicle may
be equipped with a heated
steering wheel. Press the
icon to turn this feature on
and o.
Note: The wood trim will
not heat between the 10
and 2 o’clock positions.
PANORAMIC VISTA
ROOF
®
AND POWER
SUNSHADES*: To open,
press and release the
overhead moonroof switch
. The front and rear
sunshades will open entirely,
and the glass panel will
open to the first position.
Press again to fully open.
To close, pull the switch
down. The glass panel will
stop at the first position.
Pull again and hold to fully
close the glass panel and
the sunshades. To vent from
a closed position, press the
TILT button. To close from
a venting position, pull the
TILT button.
LINCOLN MKT

Содержание

Похожие устройства

Скачать