GMC CANYON (2015) UM [13/16] Ontrol

Setting Cruise Control

1. Press the On/Off button. The Cruise Control symbol will illuminate in white on

the instrument cluster.

2. When traveling at the desired speed,

press the SET– button to set the speed.

The symbol will illuminate in green

on the instrument cluster.

Adjusting Cruise Control

RES+ Resume/Accelerate

Press to resume a set speed.

When the system is active, press once to

increase speed 1 mph; press and hold to

continue increasing speed.

SET– Set/Coast

When the system is active, press once to decrease speed 1 mph; press and hold to con-

tinue decreasing speed.

Cancel

Press to cancel the cruise control without erasing the set speed from memory.

Pressing the brake pedal also will cancel the cruise control.

The cruise control set speed is erased when cruise control or the vehicle ignition is turned off.

See Driving and Operating in your Owner Manual.

cruIse control

automatIc transmIssIon

Driver Shift Control

Driver Shift Control allows the driver to select

the range of gears desired for the current driving

conditions.

1. Move the shift lever to the Manual (M) position.

2. Press the + (plus) or – (minus) button on the

shift lever to select a lower or higher gear. An

M and the current gear will be displayed on the Driver Information Center.

The transmission will be limited to the gear selected and lower gears. If vehicle speed is

too high or too low for the requested gear, the shift will not occur.

Tow/Haul Mode

The Tow/Haul Mode adjusts the transmission shifts to reduce shift cycling, such as when

towing or hauling heavy loads or driving on steep grades.

Press the

Tow/Haul Mode button on the center of the instrument panel to turn the

system on or off.

See Driving and Operating in your Owner Manual.