Goclever INSIGNIA 5X [32/55] Bluetooth

on the ground it communicate with satellites that orbit the Earth.There are currently

27 GPS satellites in orbit – 24 are in active use and 3 act as a backup in case

another satellites fails.

In order to determine your location, a GPS receiver has to

determine:

 The locations of at least three satellites above you

 Where you are in relation to those satellites

The receiver then uses trilateration to determine your

exact location. Basically, it draws a sphere around each of

three satellites it can locate. These three spheres intersect

in two points – one is in space, and one is on the ground.

The point on the ground at which the three spheres

intersect is your location.

Warning: A GPS receiver has to have a clear line of sight to

the satellite to operate, so dense tree cover and buildings

can keep it from getting a fix on your location. Use the GPS

based services outdoors for best results. GPS positioning

can take up to 5 minutes.

Turn on gps touching the GPS icon so that it lights up blue, like on the picture on the

right.

Bluetooth

Turn on Bluetooth or set the phone as available for detection

1) Press Home>Menu, then tap Settings.

2) Tap Wireless and internet, then select the Bluetooth box to open the Bluetooth

functionality. Once started, the status box will show this icon . Touch “Scan for

devices” to start scanning for all devices within range.

3) Tap Bluetooth settings, all devices found will be displayed in the list under the

icon.

(check “Can be detected” to set the device as visible for other Bluetooth devices )

Important: maximum detection time is 2 minutes.