APart MASK8F-BL [3/7] Info apart audio com

MASK SERIES

INFO@APART-AUDIO.COM

Connecting the speakers

5

1. Keep this manual for future reference.

2. Clean only with dry cloth.

3. Do not operate near heaters or place it on other apparatus which produce a lot of heat.

4. Take care for the speaker leads. Never use damaged leads and install them in such

10. No main power shall be connected to the loudspeakers.

11. This apparatus should only be serviced by qualifi ed personnel. If not, the warranty might be void.

12. Removal of the grill causes risk to loudspeaker damage.

13. Use cables of the right gauge, certainly for long runs.

14. Use cables with clear colour codes and maintain polarity throughout the whole system.

15. Switch amplifi ers on with the volumes turned down completely to avoid loud clicks and clacks.

16. Avoid loud feedback for this is a main speaker killer!

17. Please check the unit’s condition after unpacking. If the outside of the carton box has been damaged, inform

your shipper immediately.

Music colours our life but too much sound might damage yours and others hearing permanently!

published in his manual.

This power is not always clean and can be very distorted. When such signal is fed into your loud-

speakers for a longer period, damage can be the result. Don’t cut in the budget of your amplifi er. A

loudspeaker can demand to ten times the average power to reproduce those smashing sonic bursts

you are kicking on. If your amplifi er has enough reserve power, your sound will remain clear. When

you squeeze your amp’s throat, he’ll be pushed to produce sounds which will kill your tweeters fi rst.

Protection systems are not built to be activated all the time, they are there to warn you and to

give you a safe margin!

equity between loss and cable length

As long as you stay under these cable

lengths the loss of amplifi er power

will remain below +/- 10%.