Focusrite Scarlett 2i4 USB Руководство по эксплуатации онлайн [12/18] 758640

stereo ampliﬁer; in this case, the outputs should be connected to the ampliﬁer’s inputs.

POWERED MONITORS

Typical consumer (hi-ﬁ) ampliﬁers and small powered monitors will have unbalanced inputs,

either on phono (RCA) sockets, or via a 3.5 mm 3-pole jack plug intended for direct connection to a

computer. In either case, use a suitable connecting cable with phono plugs (RCA jacks) at one end.

Hi-ﬁ ampliﬁers and powered monitors will have their own volume controls; use these to adjust the

monitoring volume.

Professional power ampliﬁers will generally have balanced inputs (either on 3-pin XLR or 3-pole

(TRS) ¼” (6.35 mm) jack sockets); use a suitable cable to connect them to the ¼” jack outputs of the

Scarlett 2i4. If you use the balanced outputs, you can adjust the monitoring volume from the Scarlett

2i4’s front panel.

NOTE: You run the risk of creating an audio feedback loop if loudspeakers are active at the same time

as a microphone! We recommend that you always turn off (or turn down) monitoring loudspeakers

while recording and use headphones when overdubbing.