Behringer QX2222USB Руководство по эксплуатации онлайн [10/26] 758868
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Behringer QX2222USB Руководство по эксплуатации онлайн [10/26] 758868

Behringer QX2222USB Руководство по эксплуатации онлайн [10/26] 758868
10 XENYX QX2442USB/QX2222USB/QX1832USB/QX1622USB User Manual
Monitor mix with eect
In this instance, your eects device should be set up as follows: the AUX SEND2
jack should be connected to the L/Mono input of your eects device, with its
outputs coming back into the STEREO AUX RETURN 1 jacks.
Connect the AUX SEND 1 jack output to the amplier of your monitor system.
TheAUX SEND 1 master control determines the overall volume of the
monitormix.
Using the STEREO AUX RETURN (TO AUX SEND) control, the eect signal can now
be blended into the monitor mix.
You can easily use the headphones distribution amplier BEHRINGER POWERPLAY
PRO HA4700/HA8000 to provide four (HA8000: eight) stereo headphone mixes for
your studio.
The following table shows which jacks on the console can be used for
thispurpose.
External eects device
receives signal from...
External eects device
routes signal back to...
The eect signal reaches the
monitor mix via…
QX1622USB AUX SEND 2
STEREO AUX RETURN 1
connectors
STEREO AUX RETURN 1
(TO AUX SEND 1) control
QX1832USB AUX SEND 1
STEREO AUX RETURN 2
connectors
MONITOR switch of the
FX/AUX 2 RET
QX2222USB AUX SEND 2
STEREO AUX RETURN
connectors 1 or 2
STEREO AUX RETURN 1
(TO AUX SEND 1) control
QX2442USB AUX SEND 2
STEREO AUX RETURN 1
connectors
STEREO AUX RETURN 1
(TO AUX SEND 1) control
optional: AUX SEND 1
STEREO AUX RETURN 2
connectors
STEREO AUX RETURN 2
(TO AUX SEND 2) control
Tab. 2.1: Connectors and controls for monitor mix with eect
STEREO AUX RETURN FX
On consoles QX1622USB and QX1832USB this is the STEREO AUX RETURN 2,
onconsoles QX2222USB and QX2442USB this is the STEREO AUX RETURN 3.
Use the STEREO AUX RETURN FX control to determine the level of the signal
routed from the AUX RETURN FX jacks to the main mix. If nothing is connected to
these jacks, the output of the built-in eects module will appear.
MAIN MIX / TO SUBS
This switch routes the signal fed in via the STEREO AUX RETURN FX jacks either to
the main mix (not pressed) or to the submix (pressed).
On the QX2442USB you can select which subgroup the signal is assigned to
(switches 1-2 / 3-4, to the right of MAIN MIX / TO SUBS).
SOLO RETURNS
Additionally, this model allows you to route the aux returns together to the solo
bus and the PFL bus. The LED lights up when Solo is on.
STEREO AUX RETURN 4 (QX2442USB only)
This control behaves the same way as the other stereo aux returns. Additionally,
it provides for a simple monitor path using the switch PHONES/CTRL ROOM ONLY.
PHONES/CTRL ROOM ONLY
Use this switch to route the signal appearing at the AUX RETURN 4 jacks to the
control room and headphones outputs.
2.3.6 Supplement to QX1832USB
The QX1832USB has a stereo fader for the AUX RETURN FX and oers a variety
of routing options: MUTE disables the eect return (but not PFL of course!),
SOLOroutes it to the Solo or PFL busses, SUB to the subgroups and MAIN to the
main mix.
QX1832USB
Fig. 2.13: The FX/AUX 2 return fader of the QX1832USB
MON
The MON switch routes the signals appearing at the AUX RETURN2 jacks to the
monitor path, along with the monitor signals from the channels.
If you wish to route the eect signal to the monitor mix, you can also switch aux
1 to pre-fader, drive the eect device from the aux 1 output and return the eect
signal via AUX RETURN 2 to the monitor signal.
2.3.7 XPQ Surround function (QX1832USB only)
QX1832USB
Fig. 2.14: Control elements of the surround function
The XPQ surround function can be enabled/disabled with the
XPQ TO MAIN switch. This is a built-in eect that widens the
stereo width, thus making the sound more lively and transparent.
Usethe SURROUND control to determine the intensity of this eect.
VOICE CANCELLER
Here, you have a lter circuitry that lets you almost entirely remove
the vocal portion of a recording. The lter is constructed in such a way
that voice frequencies are targeted without majorly aecting the rest
of the signal. Additionally, the lter seizes only the middle of the stereo image,
exactly there where the vocals are typically located.
◊ Connect the signal sources you wish to process using the Voice Canceller
to the 2-Track Input connectors. The Voice Canceller circuitry is not
available for other inputs.

Содержание

Похожие устройства

Скачать