Home
Главная
Popcorn Hour
Медиаплеер
A-210 UPGRADEKIT
Инструкция по эксплуатации Страница: 1

Popcorn Hour A-210 UPGRADEKIT Инструкция по эксплуатации онлайн

A-210 Upgrade Kit Hard Disk Installation Guide

25.5 cm (H)

38 cm (W)

Steps Installation

Installation Guide for Popcorn Hour A-210 aluminum case

Step 4

Remove the PCB from A-200 case.

1. Unscrew 3 screws holding the PCBA to

the case.

2. Lift up the PCBA but be careful of the

connector connecting the extension board.

Step 1

Flip the A-200 over to show it ’s underside.

Remove the 2 screws located at the front of the

device near the rubber pads, then remove the 3

screws located at the back of the devive at the

protruding ledge.

Step 2

Turn the A-200 so that the top logo is facing you.

Grasp the lid at the back of the device and gently

lif t it towards you. The lid will come free with a

loud click. Set the lid aside.

Step 3

Inside the A-200, remove the screw on the right

of the plastic HDD tray. Gently side the tray to

the right to remove it.

Step 5

Remove fan from PCBA.

1. Disconnect the fan power pin.

2. Flip the PCBA and locate 2 pin as shown, use

a plier to squeeze the pin out carefully.

3. The fan should pop out now, you may place

the fan aside.

Step 6

Preparing the A-210 upgrade kit.

1. Remove 3 screws from both sides of the A-210

case as shown. DO NOT remove the 4th screw,

crossed out in the diagram.

2. Remove 1 screw from the back panel.

3. Flip the case and remove 2 screws from side.

Step 7

Remove the top cover of A-210 case.

1. With all the required screws removed, lift up

the bottom piece carefully.

Networked Media Tank

RoHS

Step 8

Applying thermal rubber to case.

(require Thermal Rubber 27x27x1.6mm packet)

1. Remove thermal rubber from packet, peel of f

protective transparent seal from both side.

2. Apply it to the case as shown above.

0006DC807015

412000800075

Pass

0006DC807015

412000800075

JAPAN

back

front

RoHS

side

rear

COMPONENT VIDEO

CVBS

AUDIO OUT

COAX

OPTICAL

S/PDIF

S-VIDEO

USB-PC

USB

HDMI

ETHERNET

ACT LNK

POWER

What you need:

1. Popcorn Hour A-200

2. Popcorn Hour A-210 case

3. Philips head screw driver

4. Long nose Plier

Found in contents of A-210 case upgrade kit

1. Heat-sink

2. Thermal Rubber 50x50x2.6mm

3. Thermal Rubber 27x27x2.8mm

4. Thermal Rubber 27x27x1.6mm

5. LED Guide

6. PCB Spacer

7. Screws for LED Guide

8. Screws for PCB Spacer

9. Screws for heat-sink

Popcorn Hour A-210 case

Popcorn Hour A-200

Philips head screw driver

Long nose Plier

Thermal Rubber

LED Guide PCB SpacerHeat-sink Screws

Popcorn Hour A-210 UPGRADEKIT Инструкция по эксплуатации онлайн

Содержание

Похожие устройства