Profi Cook PC-HGA 1111 Руководство по эксплуатации онлайн [44/74] 763455

• Clean the outside with a damp cloth. A mild detergent can be used

for heavy dirt. Do not use aggressive cleaning agents or sprays.

• Thoroughly wash the inside of the tank and rinse with fresh water.

• Only use a soft cloth and never use any kind of abrasive cleaners,

which might cause scratches.

• Do not use steel wool for cleaning. Small pieces might come off the

steel wool, get stuck in the tap, and cause damage to the sealing

surface.

• When used daily, the whole tapping mechanism must be cleaned

once a week, when used more rarely, it does not have to be cle-

aned that often. Unscrew the lid of the tap for cleaning, detach the

silicon seated cone, and clean all parts in warm water with a mild

detergent. Clean the inside of the tap and the connection to the tank

with a small bottle brush. Never push the brush into the assembled

tap because it would damage the seated cone.

• Never use ammable detergents (e.g. spirit) because they cause a

higher risk of re or explosion when the appliance is next used.

• Calcareous water causes a layer of lime to settle in the tank, espe-

cially at the bottom of the tank, which can inuence the heating

capacity of the appliance. This can be easily removed by adding a

descaling agent with a citric acid base and bringing this solution to a

boil. Refer to the instructions on the decalcier for the correct dosage.

• Thoroughly rinse the tank with fresh water after decalcifying.

• Use a soft, dry cloth to dry and polish the surface after cleaning.

• Make sure the appliance was cleaned properly before storing it in a

dry place.

NOTE:

After decalcifying, boil some fresh water in order

to remove any residues. Do not use this water for

consumption.