Festool WTS 150/7 E-Plus 571750 Инструкция по эксплуатации онлайн [10/54] 9323

Festool WTS 150/7 E-Plus 571750 Инструкция по эксплуатации онлайн [10/54] 9323
10
Eccentric sander
Technical data WTS 150/7 E
Power 500 W
Speed 2000 - 6000 rpm
Sanding stroke 7 mm
Weight (excluding cable) 1.9 kg
Degree of protection
/ II
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Symbols
Warning of general danger
Wear a dust mask!
Wear protective goggles!
Read the Operating Instructions/Notes!
Wear ear protection!
1 Intended use
As specifi ed, the machines are designed for sand-
ing and polishing wood, plastic, metal, stone,
composite materials, paint/varnish, filler and
similar materials. Materials containing asbestos
must not be processed. For reasons of electrical
safety the machine must not be damp nor oper-
ated in a humid environment. The machine may
only be used for dry sanding.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
- Harmful/toxic dusts can occur during your work
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, espe-
cially inhaling them, can represent a hazard for
operating personnel or persons in the vicinity.
Comply with the safety regulations that apply in
your country. Connect the electric power tool to
a suitable extraction system.
To protect your health, wear a P2 protec-
tive mask.
Always wear protective goggles because
of possible dangers when sanding.
- The manufacturer’s handling and processing
instructions must be observed without fail if
explosive or self-igniting dusts are likely to oc-
cur during sanding.
3 Noise and vibration information
The typical values determined in accordance with
EN 60745 are:
Sound pressure level 82 dB(A)
Sound-power level 93 dB(A)
Measuring uncertainty allowance K = 3 dB
Wear ear protection!
Overall vibration levels a
h
(vector sum for three
directions) measured in accordance with EN
60745:
Handle a
h
= 4,5 m/s²
K = 2,0 m/s²
Auxiliary handle a
h
= 6,5 m/s²
K = 2,0 m/s²
The emission values specifi ed (vibration, noise)
were measured in accordance with the test con-
ditions stipulated in EN 60745 and are intended
for machine comparisons. They are also used for
making preliminary estimates regarding vibration
and noise loads during operation. The emission
values specifi ed refer to the main applications for
which the power tool is used. If the electric power
tool is used for other applications, with other tools
or is not maintained suffi ciently prior to opera-
tion, however, the vibration and noise load may be
higher when the tool is used. Take into account any
machine idling times and downtimes to estimate
these values more accurately for a specifi ed time
period. This may signifi cantly reduce the load dur-
ing the machine operating period.
4 Power supply and start-up
The mains voltage must correspond to
the specifi cation on the rating plate.
To switch on, push the switch (1.3) forwards until
it engages. Pressing the back end of the switch is
suffi cient to release the switch-on lock and switch
the machine off.

Похожие устройства

Eccentric sander Technical data Power Speed Sanding stroke Weight excluding cable Degree of protection The specified illustrations can be beginning of the operating instructions Comply with the safety regulations that apply in yourcountry Connect the electric power toolto a suitable extraction system To protect your health wear a P2 protec tive mask WTS150 7E 500 W 2000 6000 rpm 7 mm 1 9 kg O II found at Always wear protective goggles because of possible dangers when sanding The manufacturer s handling and processing instructions must be observed without fail if explosive or self igniting dusts are likely to oc cur during sanding the Symbols Warning of general danger 3 Noise and vibration information Thetypicalvaluesdetermined in accordance with EN 60745 are Sound pressure level 82 dB A Sound power level 93dB A Measuring uncertainty allowance K 3 dB Wear a dust mask Wear protective goggles Read the Operating Instructions Notes Wear ear protection Overall vibration levels ah vector sum for three directions measured in accordance with EN 60745 Wear ear protection 1 Intended use As specified the machines are designed for sand ing and polishing wood plastic metal stone composite materials paint varnish filler and similar materials Materials containing asbestos must not be processed For reasons of electrical safety the machine must not be damp nor oper ated in a humid environment The machine may only be used for dry sanding The user is liable for damage and injury resulting from incorrect usage The emission values specified vibration noise were measured in accordance with the test con ditions stipulated in EN 60745 and are intended for machine comparisons They are also used for making preliminary estimates regarding vibration and noise loads during operation The emission values specified refer to the main applications for which the power tool is used If the electric power tool is used for other applications with other tools or is not maintained sufficiently prior to opera tion however the vibration and noise load may be higher when the tool is used Take into account any machine idling times and downtimes to estimate these values more accurately for a specified time period This may significantly reduce the load dur ing the machine operating period A 2 Safety instructions î WARNING Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool Harmful toxic dusts can occur during your work e g lead containing paint some types of wood and metal Contact with these dusts espe cially inhaling them can represent a hazard for operating personnel or persons in the vicinity Power supply and start up The mains voltage must correspond to the specification on the rating plate To switch on push the switch 1 3 forwards until it engages Pressing the back end of the switch is sufficientto releasethe switch on lockand switch the machine off 10

Скачать