Luxstahl MARCO Jet 6 + Urn + FCG6 [7/22] Troubleshooting

Fault ProbableCause Action

Blank Screen The unit is not switched on Check the unit is plugged in correctly

and switched on

Plug or lead are damaged Call a qualied service technician

Power supply Check power supply

Internal wiring fault Call a qualied service technician

Brewer not “Ready” Water not connected Connect water to the rear of the

machine.

Element failure Call a qualied service technician

Grinder not working The unit is not connected to the brewer Check the unit is plugged into the

brewer.

The coffee is too weak Not enough ground coffee has been used Increase the amount of coffee

Coffee grind is too coarse Reduce the coarseness of the grind

The coffee is too strong Too much ground coffee has been used Reduce the amount of coffee

Coffee grind is too ne Increase the coarseness of the grind

Not enough water has been used Increase the amount of water

The basket is overowing Coffee grind is too ne Increase the coarseness of the grind

Too much ground coffee has been used Reduce the amount of coffee

Probes Error Build-up of scale on the probes Check probe wiring. Check probes.

Descale the tank.

Thermistor Error The thermistor response is out of tempera-

ture range

Check the thermistor is connected &

in the thermistor pocket. Change the

thermistor.

Heater Error The machine is not registering water

heating up

Check if the thermistor is in its pocket &

then check the heating element.

Overll Error Tank is lled with too much water Check level probe for scale build up.

Descale the tank.

TROUBLESHOOTING