Luxstahl MARCO Bru F60M [4/12] Troubleshooting

Fault ProbableCause Action

Brewing neon does not light, unit will not

brew

The unit is not switched on Check the unit is plugged in correctly

and switched on

Plug and lead are damaged Call a qualied service technician

Fuse in the plug has blown Replace the plug fuse

Power supply Check power supply

Internal wiring fault Call a qualied service technician

Float switch has failed Call a qualied service technician

Brewing neon is lit but unit will not brew Thermal switch is activated Reset thermal switch(es) and descale

the unit

Element failure Replace the boiler

Water coming from under the unit The overow is operating, the tank is being

over-lled

Perform water only” brew to drain

excess water

The coffee is too weak Not enough ground coffee has been used Increase the amount of coffee

Coffee grind is too coarse Reduce the coarseness of the grind

The coffee is too strong Too much ground coffee has been used Reduce the amount of coffee

Coffee grind is too ne Increase the coarseness of the grind

Not enough water has been used Increase the amount of water

The basket is overowing. Coffee grind is too ne Increase the coarseness of the grind

Too much ground coffee has been used Reduce the amount of coffee

TROUBLESHOOTING