Luxstahl MARCO Ecosmart PB10 Руководство по эксплуатации онлайн [3/13] 764021

1900051 REV.3 Page 3 of 13

 The “power on” light will glow green and the machine will fill to a safe level, above the

elements, before heating. The display will show the current water temperature and the status

“Filling…”.

 The “Ready/Status” light will cycle two red flashes while

the machine is filling to the safe level.

 After this amount of water has heated to about 95ºC the

boiler will draw more water in until the temperature drops

by 1 or 2 degrees. The boiler will then heat again. This

heat fill cycle continues until the boiler is full.

 While filling, the “Ready/Status” light will remain blank.

 The “Ready/Status” light will glow green when the

machine is up to normal operating temperature.

 The boiler is now ready for use – the display will show

the Water Temperature and the status “READY”.

 The Boiler may now be used to dispense Hot Water to

the preset factory settings.

o 95ºC

o Push and Hold operation

o Continuous flow – no pulsing

o Auto Heat Fill Mode

NOTE: Because the boiler is electronically controlled no

priming is necessary.

The element cannot switch on until a safe level of water is

reached.

EcoSmart FEATURES:

The EcoSmart Ecoboiler has many settable features which gives the operator great flexibility in

choosing how the unit will operate. The following explains how the various features may be changed

and their function.

HOW TO SETUP AN EcoSMART:

Smart Boiler (software Revision 1.10)

 Once the machine is plugged to the power socket the display will show welcome screen with

current software revision.

 After few seconds the display will show the main screen:

Welcome screen with version number main screen

 Top part of the display always shows live read-out of the tank temperature (0.5°C accuracy).

 Bottom part shows current machine status.

Power

Button

EcoMode

Button

Figure 1: Machine User

Interface