Candy GO Y1050D 07s [42/71] Electricity supply and safety advice

Electricity supply and safety advice

Washing machines are supplied to operate at a voltage of 220-240V, 50 Hz single-phase.

Check that the conductor is powerful enough to supply at least 3.0 kW, then connect the

plug to a 10A earthed socket.

After installation, the appliance must be positioned so that the plug is accessible.

Check that the electricity supply to your home has an earthing system.

The socket in your home and the plug on the appliance must be of the same type.

It is generally not advisable to use multiple adapters and/or extension leads.

All Candy washing machines comply with the safety requirements laid down by the Quality

Trademark Institute.

Safety notes

Note: for any cleaning or maintenance procedure for the washing machine:

a. Pull out the plug;

b. Candy equips all its appliances with

earthing. Ensure that the mains supply is

earthed, and if it is not, seek assistance from

a qualified person.

c. Do not use adaptors or multiple plugs;

d. Do not pull the power cable or the appliance

itself to remove the plug from the socket.

e. Do not allow children or unauthorised persons to use the appliance without supervision;

f. The appliance must not be exposed to weather conditions (rain, direct sun, etc...);

g. When moving the appliance never lift it by the controls or by the detergent drawer.

When in transit never rest the porthole against the trolley;

h. The appliance should be lifted by two people.

i. After the machine has been installed, ensure that the mains plug

and water supply valves are easily accessible.

j. Extreme care should be taken if extension leads are used in

bathrooms or shower rooms. Avoid this where possible.

k. Turn off the water inlet tap;