Fubag HONDA PTH 400H [10/26] Page09
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Fubag HONDA PTH 400H [10/26] Page09

Fubag HONDA PTH 1000 [10/26] Page09

Содержание

Похожие устройства

fubag Operator s manual www fubag ru Checking bolts nuts and screws To prevent faults or breakdowns carefully check all the nuts bolts and screws on a daily basis 1 Inspect the motor pump assembly before after every start up and usage 2 Tighten any loose nuts or bolts Warning the cylinder head bolts must be tightened by a specialist Refer to the agent for your region Renewing the engine oil Follow the environment protection instructions and drain the oil in a suitable container 1 With the engine still hot place a suitable container under the oil drain screw then remove the oil filler gauge plug and the oil drain screw N B If necessary a second black filler plug but without a gauge is available on the other side of the engine 2 After complete draining screw the oil drain screw back on 3 Top up with recommended oil then check the level 4 Refit and tighten the oil filler gauge plug 5 After filling check that there are no oil leaks 6 Wipe away any traces of oil with a clean cloth Cleaning the sediment bow 1 Close the fuel tap 2 Place a suitable container and a funnel underneath the carburettors 3 Unscrew the fuel drain plug no 1 to drain the fuel 4 After draining refit the fuel drain plug 5 Remove the sediment bowl no 3 and the seal no 2 6 Clean the sediment bowl no 3 with non flammable solvent or solvent with a high flash point Dry it completely 7 Refit the seal no 2 and the sediment bowl no 3 8 Open the fuel tap and check that there are no leaks 9 1

Скачать