Karcher SE 6.100 EU (1.081-220.0) [15/182] Description of the appliance

Karcher SE 6.100 EU (1.081-220.0) [15/182] Description of the appliance
8
Illustrations on fold-out page!
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been damaged. If
you detect any transport damages please contact your
dealer.
Illustration
1 Container
2 Connection spray hose
3 Filter flap release button
4 Connection for suction hose of the wash vacuum
cleaner
5 Filter dedusting
6 Appliance head
7 Carrying handle
8 Button for vacuuming
9 Spray button
10 Cable and hose hooks
11 Holder for spray suction pipes
12 Container release
13 Flat fold filter *
14 Dirt water reservoir, detachable *
15 Fresh water reservoir, detachable *
16 Spray/suction hose
17 Handle
18 Surrounding air separator
19 Spray lever
20 Lock key for spray mist
21 Lock lever
22 Spray / suction tubes 2 x 0.5 m
23 Washing nozzle for carpet cleaning, with hard floor
attachment
24 Washer nozzle for cleaning upholstery
25 Carpet cleaner RM 519 (100 ml)
Additional vacuuming accessories
26 Attachment for wet/dry vacuuming
27 Switchable floor nozzle for carpets and hard floors
28 Crevice nozzle
29 Upholstery nozzle
30 Filter bag
* already installed in the appliance
Illustration
Turn both releases in the direction of the arrow, re-
move the appliance head and take accessories out
of the container.
Illustration
Mount wheels and steering rollers.
Illustration
Attach the accessories holder.
Wet cleaning
(see chapter "Fill wet cleaning/fresh water reser-
voir")
Dry vacuum cleaning
(see chapter "Dry vacuuming")
Vacuuming up moist dirt/water
(see chapter "Vacuuming up moist dirt/water")
Illustration
Insert and lock the appliance head.
Illustration
Attach the suction hose and the spray hose to the
connectors on the appliance.
Note:
Press the suction hose tightly into the connection
so that it locks into place.
Illustration
Connect the spray/suction pipes and attach to the
handle. Center the locking lever when attaching it,
turn clockwise to lock.
Attach the washing nozzle to the spray suction
pipes and secure it by means of the locking lever.
The appliance is now prepared for wet cleaning.
ATTENTION
Check the object to be cleaned prior to using the appli-
ance in an inconspicuous place for colour fastness and
water resistance.
Do not clean water-sensitive floor coverings such as
wood floors (the moisture could penetrate and damage
the floor).
Notes:
Warm water (max. 50°C) will increase the cleaning ef-
fect.
Only use detergent pump while operating. Avoid dry
runs as well as unnecessary pressure buildup (dynamic
pressure) as much as possible.
If there is a risk of overheating, the thermal protection
switch shuts off the detergent pump. After cooling down
(20 - 30 min), the pump is ready for use again.
Illustration
You can remove the water reservoir to fill it.
Add 100 - 200 ml of the carpet cleaner RM 519 (volume
depends on degree of soiling) into the fresh water tank,
top up with tap water, do not overfill (observe MAX
marking).
Use washing nozzle for carpet cleaning.
Work without hard floor attachment.
Please only use the carpet cleaner RM 519.
Do not clean laminate or parquet floors!
Use washing nozzle for carpet cleaning.
Slide the hard floor attachment onto the washing
nozzle from the side.
The squeegee points towards the front, the brush
strip towards the back.
Use washing nozzle for upholstery cleaning.
Illustration
Insert the mains plug into the socket.
Press the switch for vacuuming, suction turbine is
running.
Illustration
Close fully the surrounding air separator at the han-
dle.
Illustration
Press the switch for spraying, the detergent pump
is ready.
Description of the Appliance
Operation
Before Startup
Start up
Wet cleaning
carpets/hard floors/upholstery
Fill the fresh water reservoir
Wet cleaning of carpeted floors
Wet cleaning of hard floors
Wet cleaning of upholstery
Start working
15EN

Содержание

Похожие устройства

Скачать