KRAFT KF-NF300G [12/14] Noise inside the unit

KRAFT KF-NF300G [12/14] Noise inside the unit
22
23
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE
ХОЛОДИЛЬНИК
REFRIGERATOR-FREEZER
ХОЛОДИЛЬНИК
REFRIGERATOR-FREEZER
Key
A.SET: gear setting key
Display screen
1 Gear 1
2 Gear 2
3 Gear 3
4 Gear 4
5 Gear 5
Display
For the first power-on, the display screen (including the key light) will be displayed in
full for 3s, and then the gear in the middle displays the state of running
Display of normal running
On the occurrence of a failure, the corresponding LED light will give a combined
display of failure code (loop display);
Where there is no failure, the LED light will display the current running gear of the
refrigerator.
Gear setting
The gear will be changed once every time when you press the key SET. Then, the
refrigerator will run under the setting value after 15s.
—> —> —> —> —> —>
Gear 1
Fast cool function
Enter: Circulating modulation rapid cooling mode.
Operate: Indicator of rapid cooling lights up, and the refrigerator operates at 2°C.
Exit: 1. Operate 150 min under the rapid cooling mode
2. Temperature adjustment can exit from the rapid cooling mode
Temperature control of freezing chamber
The freezing temperature is relatively low in COLDERposition, while the freezing
temperature is relatively high in “COLD” position, thus, “NORMALposition is generally
used.
When ambient temperature is high in summer, the temperature shall be in the range
from NORMALto COLD”. If the ambient temperature is above 35°C, then “COLD”
position shall prevail.
When ambient temperature is low in winter, the temperature shall be in the range from
NORMALto COLDER”. If the ambient temperature is below 10°C, then COLDER
position shall prevail.
4.2 Noise inside the unit!
You may notice that your unit makes some unusual noises. Most of these
are perfectly normal, but you should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling
system. It has become more pronounced since the introduction of CFC free gases. This
is not a fault and will not affect the performance of your unit. This is the compressor
motor working, as it pumps the refrigerant around the system.
4.3 Tips for keeping food in the unit
Cooked meats/fishes should always be stored on a shelf above raw meats/fishes to
avoid bacterial transfer. Keep raw meats/fishes in a container which is large enough
to collect juices and cover it properly. Place the container on the lowest shelf.
Leave space around your food, to allow air to circulate inside the unit. Ensure all parts
of the unit are kept cool.
To prevent transfer of favours and drying out, pack or cover the food separately. Fruit
and vegetables do not need to be wrapped.
Always let pre-cooked food cool down before you put in the unit. This will help to
maintain the internal temperature of the unit.
To prevent cold air escaping from the unit, try to limit the number of times you open
the door. We recommend that you only open the door when you need to put food in
or take food out.
4.4 Change the Light Bulb
External Display
for KF-NF310WD
KF-NF310XD
SET
TEMPERATURE
FAST COOL
2
4
6
3
8
Internal Display
for KF-NF300W
KF-NF300X

Содержание

Скачать