Bugatti Blender Vela 4105 Swarovski [14/16] Advice and recommendations on use

D. Using the measuring filler cup (1)

1) Remove the measuring filler cup (1) from the lid (2) to add the ingredients through the central hole in

the lid (2) only if the blender is switched off or running at low speed =1.

Advice and recommendations on use

4) Put into the jar (3) the ice cubes you intend to crush. Do not exceed the 1000ml (30 oz) level indicated

on the jar.

5) Insert the Plug (7) into the socket and turn the speed selector (12) on the ICE position. The program ICE

starts to work automatically with intermittent pulses to crush the ice.

6) WARNING: always keep a hand on top of the lid whilst the motor is running.

7) To stop the blender turn the speed selector (12) to the zero (0) position. We suggest to stop the blender

after a few seconds to check the consistency of the ice-crush

8) We suggest to add 100-150 ml of liquid together with the ice. In this way the result of the ice-crush is

optimal.

9) The ice function program has and automatic power off. After 30 intermittent pulses (on/off) the blender

stops automatically. To restart the function again turn the speed selector

(12) on zero (0). In this way the

blender can be used again on all its functions.

10) Use a spatula only when the blender is switched off and the plug (7) is unplugged from the socket (have

a look at point D. of the advice and recommendations on use)

2) When using medium =2 or high =3 speed with a full jar (1.5 litres) or hot

food/liquids, always switch off the blender before adding the ingredients.

3) The spatula could be used to push down the ingredients . Remove the measuring

filler cup (1) and introduce the spatula through the lid central hole (2), correctly

positioned into the Jar (3) as per below image. This operation should be done

with switch off. Spatula (8) should be used only with the correctly positioned lid

into the Jar

(3). In case of use without lid, make sure the blender is switched

off and the plug is removed from the wall socket. Never remove the plug from the

socket by pulling on the cable.

1 2 3