Melitta Caffeo CI Touch [7/22] Accessories
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Melitta Caffeo CI Touch [7/22] Accessories

Melitta Caffeo CI Touch [7/22] Accessories
24
Accessories
• 1 milk tube or 1 milk container including
milk tube (depending on the model)
• 1 Coffee scoop with screw-in aid for the
water lter
Before using for the rst time
General information
• Only use pure water without
carbonation.
• Use the supplied test strip to determine
the hardness of the water used and set
the water hardness (Page 30).
Information for using for the rst
time
When using for the rst time, the
appliance may only be switched on
without a Melitta
®
Claris
®
water lter.
Starting up the appliance
Switching on for the rst time
Warning!
Danger of re and electric shock
due to incorrect supply voltage,
incorrect or damaged connections
and power cable.
– Ensure that the supply voltage
corresponds to the supply voltage
specied on the identication label of
the appliance. The identication label is
located on the right side of the appliance
behind the cover (Image B, 13).
– Make sure that the power socket meets
the applicable standards for electrical
safety. If in doubt, contact a qualied
electrician.
– Never use damaged power cables
(damaged insulation, bare wires).
• Place the appliance on a stable, dry and
level surface with sufcient clearance (at
least 10 cm) to the sides.
• Plug the power cable into a suitable
power socket.
• Press the button to switch on the
appliance.
After switching on, rst set the language
and then the time.
• Turn the rotary switch (Fig. A, 10) to
select the respective setting (language,
hour, minute).
• Press the rotary switch to save each
setting.
After making the settings, ll the bean
container:
• Filling the bean container (“Filling the
bean container”, page 25).
Then ll the water reservoir:
• Raise the lid of the water reservoir 6 and
pull the water reservoir up and out of the
appliance.
• Fill the water reservoir with fresh tap
water only up to the max. mark.
• Insert the water reservoir into the
appliance.
• Press the rotary switch.
• Place a vessel under outlet 3.
• Press the rotary switch. First, an
automatic rinsing is carried out. The
appliance is ready for operation when
the buttons illuminate.
BA_CI_082016.indd 24 21.09.2016 07:24:42

Содержание

Похожие устройства

Скачать