Sencor SMR 110 [7/14] Before use pic 2
![Sencor SMR 110 [7/14] Before use pic 2](/views2/2007018/page7/bg7.png)
EN-5
BEFORE USE (PIC 2)
To insert batteries into the devices, fi rst remove the belt attachment: lift the
attachment clip (17) and press the belt attachment upwards (18)
Open the battery compartment (20) and insert 3 AAA batteries (19) (not
supplied), ensuring that the poles are correctly aligned. Then close the lid.
USING
1. Turning the device on/off:
To turn the device on or off, hold down the ON/OFF power button (6) for
3 seconds a BEEP sound will be played to confi rm.
2. Adjusting the volume:
To increase the volume, press the setting Up ▲ button (5); to reduce
the volume, press the setting Down ▼ button (4).
Note:
The volumelevel (3) is displayed on the screen.
3. Low Battery Indication
The battery is indicated by number of squares present inside the
battery icon on the LCD screen.
Battery Full
Battery empty
When the battery is low, the battery icon will fl ash and a beep will be
heard to indicate that the batteries need to be replaced
4. Receiving/transmitting communications:
When the display is on, the devices are in the „Reception“ mode, i.e.
they are ready to accept a call or sound transmitted on the activated
frequency.
When you short press the Call/PTT (Call) (9) button, the device will
switch to the „Transmit“ mode and will send a sound signal to the other
device.
Содержание
- Smr 110 1
- En instructions for use 5
- Item description pic 01 02 6
- Before use pic 2 7
- To prevent that you receive signals from other users sub channels have been integrated two radio s will only be able to communicate with each other when they are operating on the same radio channel and when they have selected exactly the same sub channel when using ctcss a low frequency tone between 67 and 250 hz will be transmitted along with the voice signal there are 38 available tones to choose from you are free to choose one of these 38 available tones due to fi ltering these tones will generally not be audible so they will not disturb the communication 8
- During channel monitoring the receiver circuit in the radio s will not listen to ctcss codes 9
- Vox mode will be overrided when you press the call ptt 9 button press the menu button 6 three times the current vox setting fl ashes on the display and the vox icon is displayed press button 5 to set the vox sensitivity level between 1 and 3 level 3 is the most sensitive level press button 4 until of appears on the display to turn vox off press the call ptt button 9 to confi rm and return to stand by mode 9
- En warranty conditions 14
Похожие устройства
- Asus ZE552KL Zenfone 3 64Gb Руководство по эксплуатации
- Sencor Element P005V Руководство по эксплуатации
- Sencor Element P031V Руководство по эксплуатации
- Sencor Element P403 Руководство по эксплуатации
- Sencor Element P503 Руководство по эксплуатации
- Vertex Impress InTouch 3G Руководство по эксплуатации
- Vertex Impress Envy Руководство по эксплуатации
- Xiaomi Redmi 3s 16Gb Руководство по эксплуатации
- Xiaomi Mi4 64Gb Руководство по эксплуатации
- Samsung Galaxy S7 edge 32GB DS (SM-G935FD) Руководство по эксплуатации
- Samsung Galaxy J5 Prime (SM-G570F) Руководство по эксплуатации
- Samsung Galaxy J7 (SM-J710F) Руководство по эксплуатации
- Philips M3301 Руководство по эксплуатации
- Samsung Galaxy A5 (SM-A520F) Руководство по эксплуатации
- Philips D1202B Руководство по эксплуатации
- Philips D1201B Руководство по эксплуатации
- Philips D4501 Руководство по эксплуатации
- Philips D 1251 Руководство по эксплуатации
- Samsung Galaxy A3 (SM-A320F) Руководство по эксплуатации
- Philips E 180 Руководство по эксплуатации