Saramonic SR-AX101 [5/6] Quick start guide

1.4 Specications d) Set the LINE/MIC switch.

When using microphones and wireless systems, set to MIC for microphone.

When using other audio devices, set to LINE for Line.

e) Set the M/S switch.

When using one channel, switch to M for mono.

When using two channels, switch to S for stereo.

f) Set the GND1/GND2 switch

Set the ground switch to GND1 initially. When recording, if there are some

odd noises from ground loop, you could switch it to GND2. Please switch it

exibly to the side with a better sound quality.

g) In case of any distortion, you should initially set the LEFT and RIGHT trim

controls fully clockwise. When test recording, you could adjust the knobs

exibly to get the the optimum signal levels.

h) If your camera has a headphone jack, you can plug an earphone into the

headphone terminal on the camera to monitor the audio. Please make sure

that both channels can be heard and adjust the trim controls if any

distortion.

Input Level MIC： -35 dBu LINE：-10 - +4 dBu

Output Level General Mic Levels

Frequency Response 10Hz to 100kHz (+/-1.5 dB)

Dimensions 87 (L) x 80(W) x 52(H) mm

Weight 191g (6.7oz.)

2 Quick Start Guide

a) Attach the SR-AX101 to the base of the camera. Spin counter-clockwise to

tighten up the adapter with the camera. Mount the adapter to a tripod with

the tripod socket on the bottom of the adapter.

b) Connect the supplied signal transmission line from the output jack(OUT) of

adapter to the MIC input of camera. If there is a MIC / Line switch on the

camera, select it to MIC.

Note: Please switch o the AGC function of your camera if possible.

c) Connect balanced XLR microphones, wireless mics or other audio sources

to the LEFT and RIGHT XLR or AUX inputs on the SR-AX101.