Boss Katana 100 Head MKII [6/12] Rear panel
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Boss Katana 100 Head MKII [6/12] Rear panel

Boss Katana 100 Head MKII [6/12] Rear panel
6
Panel Descriptions
11 AC IN jack
Connect the included power cord.
* Use only the power cord that was included with the unit.
12 SPEAKER OUT jack
HEAD only
Connect a speaker box. Only use speaker cable to connect the
speaker. Do not use any shielded cable designed for use with
guitars.
When connecting an external speaker to the KATANA-HEAD Mk II
5 If a plug is inserted in this jack, no sound will be output
from the KATANA Mk II’s own speaker.
5 You must use a speaker box that has an input
impedance of 8Ω or higher.
13 EFX LOOP SEND/RETURN jacks
100, 100/212, HEAD only
Connect an external eect device (mono).
Connect the SEND jack to the input of your external eect device,
and connect the output of your external eect device to the
RETURN jack.
14 [STEREO EXPAND] switch
100, 100/212, HEAD only
Two KATANA Mk II units can be connected for stereo output.
Stereo connection method
AMP 1
(MASTER)
AMP 2
(SLAVE)
1. From the LINE OUT jack of the amp to which your guitar is
connected (MASTER), connect to the POWER AMP IN jack
of the other amp (SLAVE).
2. Turn ON the [STEREO EXPAND] switch of both amps.
* The controls of the slave amp other than the [MASTER] knob and
the [POWER CONTROL] switch do not function.
15 LINE OUT jack
100, 100/212, HEAD only
Connect this to your PA system or recorder. You can obtain powerful
guitar amp sound just as if you were playing through the speaker.
Recorder, etc.
You can use this in conjunction with an external PA system, or to
record your performance via direct line while monitoring the sound
from the KATANA Mk II’s speaker.
Adjust the output level using the [VOLUME] knob.
Since the [MASTER] knob does not aect the output, you can turn
down the [MASTER] knob so that sound is output to a connected
device without any sound being produced from the amp itself.
* To prevent malfunction and equipment failure, always turn
down the volume, and turn o all the units before making any
connections.
16 POWER AMP IN jack
This jack directly inputs a signal to the power amp without passing
it through the preamp of the KATANA Mk II. You can use it to input
sound that’s been shaped by an external preamp or by a multi-
eect unit equipped with an amp simulator. When the POWER AMP
IN jack is being used, the [PANEL] button is lit red.
* Sound that is input to this jack is not aected by controls other than
the [MASTER] knob and the [POWER CONTROL] switch.
* Leave the [STEREO EXPAND] switch OFF unless you’re using two KATANA Mk II
units in a stereo connection.
* The POWER AMP IN jack and the INPUT jack cannot be used
simultaneously. If cables are connected to both, the INPUT jack has
priority.
17 MIDI IN jack
HEAD only
You can control the KATANA-HEAD Mk II from a multi-eect unit or
a MIDI foot controller.
How the MIDI receive channel is specied
Receive channel Operation
CH 1 Hold down the [CH 1] button while turning the power on.
CH 2 Hold down the [CH 2] button while turning the power on.
CH 3 Hold down the [CH 3] button while turning the power on.
CH 4 Hold down the [CH 4] button while turning the power on.
* Receive channel is set to CH1 when shipped from the factory.
KATANA-50 Mk II
18 20 2119
16
11
KATANA-100 Mk II, KATANA-100/212 Mk II, KATANA-HEAD Mk II
2117 1918 20
12 14 15 1613
* The illustration shows the KATANA-HEAD Mk II. KATANA-100 Mk II and KATANA-100/212 Mk II
do not have MIDI jack and SPEAKER OUT jacks.
Rear Panel

Содержание

Похожие устройства

Скачать