![Antari SW-250X [6/11] Air volume setting](/img/pdf.png)
Antari SW-250X [6/11] Air volume setting
![Antari SW-250X [6/11] Air volume setting](/views2/1992233/page6/bg6.png)
6
Для настройки выходного объема снега в режиме таймера нажатием кнопок
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing
and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
и
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
(от 1 до 100%).
Для настройки выходного объема снега в режиме непрерывной работы нажатием кнопок
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing
and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
и
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
(от 1 до 100%).
Для настройки DMX канала в режиме управления DMX нажатием кнопок
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing
and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
и
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
(от 1 до 512 каналов).
Для активации/отключения системы беспроводного управления нажатием кнопок
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing
and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
и
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
(ВКЛ./ВЫКЛ.). При активации системы беспроводного управления на экране
под сообщением “Ready To Snow” будет отображена буква “W”. После выключения системы беспро-
водного управления буква “W” больше не будет отображаться.
Для активации/отключения функции быстрого запуска нажатием кнопок
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing
and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
и
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
(ВКЛ./ВЫКЛ.). При включении функции Quick Start выбранный режим подачи снега
(LCD/W-1/DMX) до выключения питания будет восстановлен при последующем включении генера-
тора. Если же устройство было выключено до выбора режима подачи снега, то при восстановлении
работы генератора на экране будет отображено сообщение “Ready To Snow”.
Нажмите кнопку
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing
and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
для настройки интервала/длительности работы и нажмите кнопку
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press
to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
для оста-
новки работы.
Нажмите кнопку
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
для настройки непрерывной подачи снега и нажмите кнопку
6
buttons (10 to 200 seconds).
To set the output volume under timer mode by pressing and
buttons (1 to 100 %).
To set the output volume under continuous mode by pressing and
buttons (1 to 100 %).
. To set the DMX channel under DMX control mode by pressing and
buttons (1 to 512 channels).
To activate/terminate the wireless control system by pressing and
buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
To activate / terminate quick start function by pressing and
buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
Press button to execute the interval/duration timing set and press
to stop.
Press button to output continuously until button is pressed.
There’s a small button “” located at rear of the machine used for adjusting the fan output volume.
In general, when the fan output is increased the snow flakes produced are smaller. In contrast, when the fan
для остановки.
Кнопка , расположенная на задней панели генератора предназначена для настройки выходного объ-
ема вентилятора. При увеличении выходного объема вентилятора снежинки становятся меньше. И, наоборот, при
уменьшении выходного объема вентилятора снежинки становятся крупнее. Тем не менее, эти настройки не влияют
на выходной объем снега.
Содержание
- Генератор снега antari sw 250 руководство пользователя 1
- Введение 3
- Генератор снега antari sw 250 3
- Риск возгорания 3
- Риск поражения электрическим током 3
- Проверка комплектации 4
- Установка и включение питания 4
- Air volume setting 5
- Lcd control operation 5
- Transmitter registration 5
- Настройка функций 5
- Операции на экране 5
- Регистрация передатчика 5
- Air volume setting 6
- Настройка выходного объема вентилятора 6
- Air volume setting 7
- Операции пульта ду 7
- Обслуживание 9
- Операции dmx управления 9
- Предостережение 9
- Approval 10
- Жидкость для производства снега 10
- Технические характеристики 10
- C08sw2501 11
Похожие устройства
- Shure SM58-LCE Руководство по эксплуатации
- Shure BETA 58A Руководство по эксплуатации
- Sennheiser CX 3.00 Руководство по эксплуатации
- Madboy TUBE-402 Руководство по эксплуатации
- Madboy TUBE-202 Руководство по эксплуатации
- Casio Celviano AP-450 Руководство по эксплуатации
- Denn DEK885 Руководство по эксплуатации
- Noname MARSHALL Major II Инструкция по эксплуатации
- Supra SKB-495 Руководство по эксплуатации
- Supra SKB-617 Руководство по эксплуатации
- Ibanez RU10 Руководство по эксплуатации
- Ibanez MU30 Руководство по эксплуатации
- Ibanez PU10 Руководство по эксплуатации
- Ibanez MU40 Руководство по эксплуатации
- Ibanez LU30 Руководство по эксплуатации
- Ibanez GU30 Руководство по эксплуатации
- Ibanez CU40 Руководство по эксплуатации
- Ibanez LU10 Руководство по эксплуатации
- Ibanez CU1 Руководство по эксплуатации
- Ibanez CU30 Руководство по эксплуатации