LINE 6 POD xt Live Руководство по эксплуатации онлайн [24/82] 777352

FBV MkII Advanced User Guide: FBV Control Application

3•4

Toggle1/Up Toggle2/Dn CC/Val Columns: These columns become selectable when the MIDI

Command is set to “MIDI CC” and Value is set to “Custom”. Individual values can be then be entered

manually here to specify the Toggle 1/Up and Toggle 2/Down switch behaviors. (See “Footswitch

Control Behaviors” on page 3•5 for details.)

Port: The FBV Control software MIDI Out port the data is to be sent out. The FBV MkII device offers

four independent USB MIDI Out Ports that are selectable by other MIDI software on your computer to

receive the MIDI Commands FBV is transmitting. You can choose Port 1, 2, 3, 4 or All independently

for any Control.

TIP: If you want to use your FBV to control more than one software application at the same time on your

computer, then you can set Controls to different Ports to allow each application to “listen” strictly on its

own MIDI Port to receive only the intended Commands.

Channel: The MIDI Channel the data is sent out on the selected Port(s). You can choose any single

channel, 1 thru 16. If the you select “All” in the Ports column for the Control, the current MIDI

Channel setting is used for all four MIDI Ports.

Switch Mode: The options available here are dependent on the currently selected MIDI Command.

(There are no Switch Mode options for the Pedal Wah, Pedal Vol, or Pedal 2 controls.)

• If the MIDI Command is Bank Change or Program Change, the options available here are

Increment, Decrement, or Fixed:

• Increment: Sets the footswitch to increment thru Banks/Presets by the amount of 1 to 127*,

as set in the Value column.

• Decrement: Sets the footswitch to decrement thru Banks/Presets by the amount of 1 to

127*, as set in the Value column.

*Note: It is actually possible to select a value of “0” for the Bank or Program Change command type when

set to the Increment/Decrement Switch Modes, however, this is not recommended since this is not a valid

option for most MIDI applications to receive.

• Fixed: Sets the Footswitch action to jump to a speciﬁc Bank/Preset number 0 through 127,

as set in the Value column .

Note: Any FBV Bank Change command always also transmits a Program Change as part of its MIDI

message. This provides the behavior where the ﬁrst preset is automatically recalled within the new, selected

Bank. For example, if your software is currently on Bank #1 and preset #23, if your FBV Control is

conﬁgured to send Bank Change_Increment_Value 1, this results in recalling Bank #2 and preset #1 in

your target software.

• If the MIDI Command is MIDI CC, the options are Single, Momentary, or Toggle to provide

these types of switch behaviors. Please also see “Footswitch Control Behaviors” on page 3•5 for the

details on these switch modes.

• If the MIDI Command is MMC or Mackie, there are no selectable Switch Mode options.

However, you will see that some MMC and Mackie commands will automatically set themselves

to be “Toggle” behaviors, such as “Play/Stop” which alternates between sending these two

messages.