LINE 6 Spider IV 75 [20/33] Pitch glide tips

SmartFX

4•4

Here are a few important points to remember regarding SmartFX customization:

• If you change any settings in Edit Mode for one of the SmartFX, your settings will be

recalled when you turn the SmartFX knob for that effect (and its LED will be amber)

• Parameters that you do not change will default to the pre-programmed SmartFX

settings for that effect - so when you turn the SmartFX knob, all settings other than

your customized settings will change as they normally would for that effect

• Only 1 effect per SmartFX knob can be customized at a time

• SmartFX customization settings are saved with each preset

• If you turn the SmartFX knob to the Off position, customization will be lost and all

effects for that SmartFX knob will revert to the default settings

To see what the individual settings are, select a setting on the FX1 knob, press the Presets

knob to enter Edit Mode, then use the up/down arrows to navigate thru the various Pitch

Glide parameters.

If you decide to customize your Pitch Glide settings, keep in mind that the note pitch will

be determined by a combination of Heel value, Toe value, and Pedal Position. With no

pedal connected and POS value set at 0, the Heel value determines the note you hear.

Pitch Glide Tips

When you turn the FX1 knob to the Pitch position, the Pitch Glide effect will be activated.

Listen as you turn the FX1 knob slowly thru all the different SmartFX settings. Along with

your original note, you’ll hear a 2nd note 2 octaves down, then 1 octave down, then -9, -7,

-5, -4, -3, +3, +5,+7, +9 (in semitones), 1 octave up and 2 octaves up. Mix is set at 44%.

For example, with Heel at +7 and POS at 0, you get a 5th note, which is 7 half steps up.