Infiniti QX56 (2006) [47/384] Child restraint installation on 2nd row bench seats if so equipped

6. Check that the retractor is in the automatic

locking mode by trying to pull more seat belt

out of the retractor. If you cannot pull any

more seat belt webbing out of the retractor,

the retractor is in the automatic locking

mode.

7. Check to make sure that the child restraint is

properly secured prior to each use. If the belt

is not locked, repeat steps 3 through 6.

After the child restraint is removed and the seat

belt fully retracted, the automatic locking mode

(child restraint mode) is canceled.

CHILD RESTRAINT INSTALLATION

ON 2ND ROW BENCH SEATS (if so

equipped)

WARNING

● The three-point seat belt in your vehicle

is equipped with an automatic locking

mode retractor which must be used

when installing a child restraint.

● Failure to use the retractor’s locking

mode will result in the child restraint

not being properly secured. The re-

straint could tip over or otherwise be

unsecured and cause injury to the child

in a sudden stop or collision.

● When installing a child restraint system

in the 2nd row center position both the

center seat belt connector tongue and

buckle tongue must be secured.

Front facing (center) — step 1

LRS0377

Safety—Seats, seat belts and supplemental restraint system 1-31

Z REVIEW COPY—

2006 Infiniti QX56 (iwz)

Owners Manual—USA_English (nna)

06/16/05—arosenma