Infiniti QX56 (2006) [57/384] Review copy 2006 infiniti qx56 iwz owners manual usa_english nna 06 16 05 arosenm

Allow the seat belt to retract. Pull up on the

shoulder belt to remove any slack in the belt.

Before placing the child in the child restraint,

use force to push the child restraint from

side to side, and tug it forward to make sure

that it is securely held in place. It should not

move more than 1 inch (25mm). If it does

move more than 1 inch (25 mm), pull again

on the shoulder belt to further tighten the

child restraint. If unable to properly secure

the restraint move the restraint to another

rear seating position and try again , or try a

different child restraint. Not all child re-

straints fit in all types of vehicles.

6. Check that the retractor is in the automatic

locking mode by trying to pull more seat belt

out of the retractor. If you cannot pull any

more seat belt webbing out of the retractor,

the retractor is in the automatic locking

mode.

7. Check to make sure that the child restraint is

properly secured prior to each use. If the belt

is not locked, repeat steps 3 through 6.

After the child restraint is removed and the seat

belt fully retracted, the automatic locking mode

(child restraint mode) is canceled.

Rear Facing — step 4

WRS0384

Rear Facing — step 5

WRS0386

Safety—Seats, seat belts and supplemental restraint system 1-41

Z REVIEW COPY—

2006 Infiniti QX56 (iwz)

Owners Manual—USA_English (nna)

06/16/05—arosenma