Infiniti QX56 (2008) [111/432] Headlight beam select
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti QX56 (2008) [111/432] Headlight beam select

Infiniti QX56 (2008) [111/432] Headlight beam select
NOTE:
Autolight activation sensitivity and the
time delay for autolight shutoff can be ad-
justed. See “Comfort and convenience set-
tings” in the “Monitor, climate, audio,
phone and voice recognition systems(sec-
tion later in this manual.
To turn on the autolight system:
1. Turn the headlight switch to the AUTO posi-
tion
s
1
.
2. Turn the ignition key to ON.
3. The autolight system automatically turns the
headlights on and off.
Initially, if the ignition switch is turned OFF and a
door is opened and left open, the headlights
remain ON for 5 minutes. If another door is
opened during the 5 minutes, then the 5 minute
timer is reset.
To turn the autolight system off, turn the switch to
the OFF,
,or position.
Be sure you do not put anything on top of
the autolight sensor
s
1
located in the top
side of the instrument panel. The autolight
sensor controls the autolight; if it is cov-
ered, the autolight sensor reacts as if it is
dark out and the headlights will illuminate.
If this occurs while parked with the engine
off and the key in the ON position, your
vehicle’s battery could become discharged.
Headlight beam select
s
1
To select the high beam function, push the
lever forward. The high beam lights come on
and the
light illuminates.
s
2
Pull the lever back to select the low beam.
s
3
Pulling and releasing the lever flashes the
headlight high beams on and off.
Battery saver system
If the ignition switch is turned OFF while the
headlight switch is in the
or posi-
tion, the headlights will turn off after 5 minutes.
LIC0836 WIC1252
Instruments and controls 2-29
Z REVIEW COPY—
2008 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
01/18/08—debbie
X

Содержание

Похожие устройства

Скачать