Infiniti QX56 (2008) [169/432] Linking a keyfob to a stored memory position
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti QX56 (2008) [169/432] Linking a keyfob to a stored memory position

Infiniti QX56 (2008) [169/432] Linking a keyfob to a stored memory position
The automatic drive positioner system has two
features:
● Memory storage function
● Entry/exit function
MEMORY STORAGE FUNCTION
Two positions for the driver’s seat, steering
wheel, accelerator and brake pedals, and outside
mirrors can be stored in the automatic drive po-
sitioner memory. Follow these procedures to use
the memory system.
1. Set the automatic transmission shift selector
lever to the P (Park) position.
2. Turn the ignition ON.
3. Adjust the driver’s seat, steering wheel, ac-
celerator and brake pedals, and outside mir-
rors to the desired positions by manually
operating each adjusting switch. For addi-
tional information, see “Seats” in the
“Safety—Seats, seat belts and supplemen-
tal restraint system” section and “Pedal po-
sition adjustment,” “Steering wheel” and
“Outside mirrors” earlier in this section.
During this step, do not turn the ignition to
any position other than ON.
4. Push the SET switch and, within 5 seconds,
push the memory switch (1 or 2) fully for at
least 1 second.
The indicator light for the pushed memory
switch will come on and stay on for approxi-
mately 5 seconds after pushing the switch.
After the indicator light goes off, the se-
lected positions are stored in the selected
memory (1 or 2).
If a new memory is stored in the same memory
switch, the previous memory will be deleted.
Linking a keyfob to a stored memory
position
Each keyfob can be linked to a stored memory
position (memory switch 1 or 2) with the follow-
ing procedure.
LPD0419
AUTOMATIC DRIVE POSITIONER
Pre-driving checks and adjustments 3-27
Z REVIEW COPY—
2008 Infiniti QX56 (iwz)
Owners Manual—USA_English (nna)
01/18/08—debbie
X

Содержание

Похожие устройства

Скачать