Infiniti G35 Sedan (2006) [119/344] Warning
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti G35 Sedan (2006) [119/344] Warning

Infiniti G35 Sedan (2006) [119/344] Warning
WARNING
O
Do not use the HomeLink Universal
Transceiver with any garage door opener
that lacks safety stop and reverse features
as required by federal safety standards.
(These standards became effective for
opener models manufactured after April 1,
1982.) A garage door opener which cannot
detect an object in the path of a closing
garage door and then automatically stop
and reverse, does not meet current federal
safety standards. Using a garage door
opener without these features increases
the risk of serious injury or death.
O During the programming procedure, your
garage door or security gate will open or
close (if the transmitter is within range).
Makesurethatpeopleorobjectsareclear
of the garage door, gate, etc. that you are
programming.
O Your vehicle’s engine should be turned
off while programming the HomeLink
Universal Transceiver.
PROGRAMMING HomeLink
To program your HomeLink Transceiver
to operate a garage door, gate, or entry
door opener, home or office lighting, you
need to be at the same location as the
device. Note: Garage door openers (manu-
factured after 1996) have “rolling code
protection”. To program a garage door
opener equipped with “rolling code pro-
tection”; you will need to use a ladder to
get up to the garage door opener motor to
be able to access the “training” program
button.
1. To begin, push and hold the 2 outer
HomeLink
buttons (to clear the
memory) until the indicator light
q
A
blinks (after 20 seconds). Release both
buttons.
2. Position the end of the hand-held trans-
mitter1-3inches (26 - 76 mm) away
from the HomeLink
surface.
SIC3012
Instruments and controls 2-47
w 06.1.4/V35-D/V5.0 X

Содержание

Похожие устройства

Скачать