Infiniti G35 Sedan (2006) [243/344] Warning
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Infiniti G35 Sedan (2006) [243/344] Warning

Infiniti G35 Sedan (2006) [243/344] Warning
Installing the spare tire
The spare tire is designed emergency use.
See specific instructions under the
heading “Wheels and tires” in the “8.
Maintenance and do-it-yourself” section.
1. Clean any mud or dirt from the surface
between the wheel and hub.
2. Carefully put the wheel on and tighten
the wheel nuts finger tight.
(Coupe models)
When replacing a front tire, make sure
the hole in the spare tire wheel is
aligned with the pin on the brake
rotor.
3. With the wheel nut wrench, tighten
wheel nuts alternately and evenly until
they are tight.
4. Lower the vehicle slowly until the tire
touches the ground. Then, with the
wheel nut wrench, tighten the wheel
nuts securely in the sequence illus-
trated (
q
1
,
q
2
,
q
3
,
q
4
,
q
5
). Lower the
vehicle completely.
WARNING
O Incorrect wheel nuts or improperly tight-
ened wheel nuts can cause the wheel to
become loose or come off. This could
cause an accident.
O Do not use oil or grease on the wheel
studs or nuts. This could cause the nuts
to become loose.
O Retighten the wheel nuts after the ve-
hicle has been driven for 600 miles
(1,000 km) (also in cases of a flat tire,
etc.).
As soon as possible tighten the wheel nuts
to the specified torque with a torque
wrench.
Wheel nut tightening torque:
80 ft-lb (108 Nzm)
The wheel nuts must be kept tightened to
specification at all times. It is recom-
mended that wheel nuts be tightened to
specification at each lubrication interval.
Adjust the tire pressure to the COLD pres-
sure.
COLD pressure:
After the vehicle has been parked for three
hours or more or driven less than 1 mile
(1.6 km) at moderate speeds.
COLD tire pressures are shown on the Tire
and Loading Information label affixed to
the driver side center pillar.
SCE0039
In case of emergency 6-7
w 06.1.4/V35-D/V5.0 X

Содержание

Похожие устройства

Скачать