Infiniti QX56 (2010) [60/444] Review copy 2010 infiniti qx56 iwz owners manual owners usa_english nna 02 12 09 dian

4. For child restraints that are equipped with

webbing-mounted attachments, remove any

additional slack from the anchor attach-

ments. Press downward and rearward firmly

in the center of the child restraint with your

knee to compress the vehicle seat cushion

and seatback while tightening the webbing

of the anchor attachments.

5. If the child restraint is equipped with a top

tether strap, route the top tether strap and

secure the tether strap to the tether anchor

point. See “Installing top tether strap” in this

section. Do not install child restraints that

require the use of a top tether strap in seat-

ing positions that do not have a top tether

anchor.

6. After attaching the child restraint, test it be-

fore you place the child in it. Push it from side

to side while holding the child restraint near

the LATCH attachment path. The child re-

straint should not move more than 1 inch (25

mm), from side to side. Try to tug it forward

and check to see if the LATCH attachment

holds the restraint in place. If the restraint is

not secure, tighten the LATCH attachment

as necessary, or put the restraint in another

seat and test it again. You may need to try a

different child restraint. Not all child re-

straints fit in all types of vehicles.

Forward-facing – step 4

LRS0671

Forward-facing – step 6

WRS0697

Safety—Seats, seat belts and supplemental restraint system 1-43

墌 REVIEW COPY—

2010 Infiniti QX56 (iwz)

Owners Manual (owners)—USA_English (nna)

02/12/09—diane

墍