Infiniti G37 Sedan (2009) [43/425] Rear facing

6. After attaching the child restraint, test it

before you place the child in it. Push it

from side to side while holding the seat

near the LATCH attachment path. The

child restraint should not move more than

1 in (25 mm) from side to side. Try to tug

it forward and check to see if the belt

holds the restraint in place. If the re-

straint is not secure, tighten the belt as

necessary, or put the restraint in another

seat and test it again. You may need to try

a different child restraint. Not all child

restraints fit in all types of vehicles.

7. Check to make sure the child restraint is

properly secured prior to each use. If the

child restraint is loose, repeat steps 3

through 6.

Rear-facing

Follow these steps to install a rear-facing child

restraint using LATCH system:

1. Position the child restraint on the seat.

Always follow the child restraint manufac-

turer’s instructions.

Front-facing — step 6

SSS0638

Rear-facing (webbing-mounted) — step 2

SSS0648

1-26 Safety — Seats, seat belts and supplemental restraint system

췽 —

—

07/23/08—pattie

墍