CADILLAC ESCALADE HYBRID (2010) [504/620] License plate lamp

Black plate (56,1)

Cadillac Escalade/Escalade ESV Owner Manual - 2010

7. Reinstall the taillamp assembly. When reinstalling,

make sure to line up the pins on the taillamp

assembly with the vehicle. If you do not line up the

pins correctly, you will not be able install the

taillamp assembly properly.

If you need to replace the taillamp, stoplamp, or turn

signal, you will need to see your dealer for service.

License Plate Lamp

1. Remove the two screws holding each of the

license plate lamps to the molding that is part of

the liftgate.

2. Twist and pull the license plate lamp forward

through the molding opening.

3. Turn the bulb socket counterclockwise and pull the

bulb straight out of the socket.

4. Install the new bulb.

5. Reverse Steps 1 through 3 to reinstall the license

plate lamp.

Replacement Bulbs

Exterior Lamp Bulb Number

Back-up Lamp 7440

License Plate Lamp W5W

For replacement bulbs not listed here, contact your

dealer.

7-56