A.M.E. ММ-1 [6/29] Self diagnostics functions

ENGLISH

User’s Guide

AME MM1 Car Alarm System

Passive Arming

This feature can be selected using programming.

Opening and closing the doors with the ignition switched off will cause the indicators to flash twice and LED to

flash quickly to indicate that the passive arming sequence has begun. If all the doors, hood and trunk remain closed

for 10 seconds the alarm system will arm (with or without door locking depending on the program setting). If any

door, hood, or trunk is opened within 10 seconds, the 10second arming period will start again after the door,

hood, or trunk is closed.

If you need to you can cancel the passive arming until the next switching the ignition on with pressing button 2

during 10second arming period.

Ignition Safety Door Lock/Unlock

This feature can be selected using programming.

5 seconds after the ignition is turned on the doors will lock for passive safety and will automatically unlock when

the ignition is switched off. If the door is opened within 5 seconds of the ignition being switched on, the door lock

pulse will be cancelled to prevent the driver being locked out.

You also can lock and unlock the doors at any time pressing button 1 and 2 on the transmitter.

SelfDiagnostics Functions

Intrusion Warning

If the door, hood, trunk or sensor has triggered the alarm system during an armed period, the indicators will

flash 4 additional times and the siren will beep 4 additional times, when the system is disarmed, to indicate to the

driver that the alarm has been triggered.

Trigger memory

When the alarm system is disarmed the LED will flash in a sequence to indicate the sensor or switch that

triggered the alarm system. This sequence will repeat until the ignition is switched on.

Flashes Trigger Input

2 Sensor

3 Door()/Door(+)

4 Trunk

5 Ignition

6 Hood

Zone By Pass

If a door, hood, trunk or sensor triggers the alarm system eight times in succession during onearmed period

the alarm system will then ignore any further signals from that sensor. All other sensors and the starter kill will

remain activated when the sensor is by passed.