Al-Ko Robolinho 700 E Руководство по эксплуатации онлайн [54/448] 779321

Al-Ko Robolinho 700 E Руководство по эксплуатации онлайн [54/448] 779321
GB
54 Robolinho 700E/700I
Settings
1. or * Rain sensor
2. Activating/deactivating the rain sensor:
or Activate :
Activate the rain sensor.
or Deactivate :
Deactivate the rain sensor.
3. Setting the delay of the rain sensor:
or * After rain delay
xx hours xx minutes
Select the required value for the hour/
minute in sequence with or and
respectively accept with .
7.4 Setting the mowing program
7.4.1 Setting the mowing program – General
1. Call up the main menu with .
2. or * Programs
3. Select the menu item with or and ac-
cept with .
4. Carry out the settings.
Note:The menu items are described in the
following sections.
7.4.2 Setting the start points
Teaching-in start points
1. Place the appliance in the base station.
2. Switch on the appliance with .
3. Call up the main menu with .
4. or * Programs
5. or * Entry Point
6. or * Interactive teach
7. or * Start interactive entry
point teaching :
or Start . The appliance
moves along the boundary cable.
or Set when the appliance
has reached the required start point. The
start point is stored.
8. or Set entry point 1 if no
start point has been specified during the
teaching-in movement. If no start point has
been specified here, the start points are auto-
matically specified.
9. or Entry point x: XXm if
the last start point has been reached.
Manually specifying start points (01)
The first start point (01/X0) is pre-set and is 1m
to right of the base station. Up to 3 other start
points (X1 to X3) can be programmed behind this
point. When specifying the start points, heed the
following:
Do not set start points too far from the base
station or too close to one another(02/f).
Only use as many start points as necessary.
1. or * Entry Point
2. or * Point X1 at [020m]
Select one digit in sequence with or
and accept accordingly with .
3. or * Point X2 at [075m]
Select one digit in sequence with or
and respectively accept with .
4. If necessary, specify further start points.
5. Return to the main menu with .
7.4.3 Setting the mowing times
NOTE
There must be at least 30min. between
programming the mowing times and the
mowing start. If not, the appliance only
starts at the next programmed mowing
time.

Содержание

Скачать