Caso CR4 [29/96] Warning

13.3 Unpacking

To unpack the device, proceed as follows:

 Remove the device out of the carton and remove the packaging material.

Warning

Personal and property damages can occur during commissioning of the device!

Observe the following safety notices to avoid such dangers:

► The drums have very sharp edges, be very careful when you touch them.

13.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging

materials are selected in accordance with environmentally compatible and recycling-

related points of view and can therefore be recycled.

Returning the packaging back to the material loop saves raw materials and reduces the

quantities of accumulated waste. Take any packaging materials that are no longer required

to “Green Dot” recycling collection points for disposal.

Please note

► If possible, keep the original packaging for the device for the duration of the guarantee

period of the device, in order that the device can be re-packaged properly in the event

of a guarantee claim.

13.5 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following

instructions must be observed for the electrical connection:

 Before connecting the device, compare the connection data (voltage and frequency)

on the rating plate with those of your electrical network. This data must agree in

order that no damages occur in the device

If in doubt, ask your qualified electrician.

 The electrical outlet must be protected by a 16A safety cut-out switch.

 The connection between the device and the electrical network may employ a 3 meter

long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple

plugs or gangs is prohibited because of the danger of fire that is involved with this.

 Make sure that the power cable is undamaged and has not been installed under the

device or over hot or sharp surfaces.

 The electrical safety of the device is only guaranteed if the device is connected to a

properly installed protective conductor system. Operations using an electrical outlet

without a protective conductor are prohibited. If in doubt, have the house installation

checked over by a qualified electrician.

The manufacturer cannot be made responsible for damages that are caused by a

missing or damaged protective conductor.