Delfa UGR-465 [22/24] Cleaning and care

Meat grinder | UGR-465 / UGR-466

ENGLISH

CLEANING AND CARE

Clean the meat grinder after each use.

Clean the meat grinder immediately after ﬁnishing work with it.

Before disassembling and cleaning the meat grinder, turn it off using the mode

switch, and then unplug it. Unscrew the ﬁxing ring and remove all attachments

from the snake and remove the snake from the head. Press the lock button and

remove it. Remove the pusher and the hopper plate.

Wash all the parts that come into contact with the products with running water

using mild detergents. Then rinse them with clean hot water and immediately

wipe dry. It is recommended to grease the knife and grilles with vegetable oil.

Attention: the parts of the meat grinder should not be washed in the

dishwasher. Store the meat grinder in a cool dry place.

Unclogging

1. If the meat stuck in the head during the operation, turn off the meat grinder

by pressing [POWER] – the engine should stop working.

2. Then turn the button [REV] – the snake will rotate in the opposite direction

while the button is pressed and the clog will be eliminated.

After removing the blockage, you can continue working as usual. If the blockage

is not eliminated, disconnect the grinder from the mains, disassemble it and

remove the clog by your hands.